Line 6: |
Line 6: |
| ===Features=== | | ===Features=== |
| | | |
− | * 1/2.8 inch 2 Mega STARVIS sensor IMX290/IMX327 by SONY | + | *1/2.8 inch 2 Mega STARVIS sensor IMX290/IMX327 by SONY |
− | * LVDS output: 7:1 interface (VEYE-LVDS-290/VEYE-LVDS-327 support) | + | *LVDS output: 7:1 interface (VEYE-LVDS-290/VEYE-LVDS-327 support) |
− | * MIPI output: CSI-2 (VEYE-MIPI-290/VEYE-MIPI-327 support) | + | *MIPI output: CSI-2 (VEYE-MIPI-290/VEYE-MIPI-327 support) |
− | * Uncompressed UYVY format, YUV422-8bit | + | *Uncompressed UYVY format, YUV422-8bit |
− | * Standard lens mount | + | *Standard lens mount |
− | * IR-CUT circuit | + | *IR-CUT circuit |
− | * BLC, DOL-WDR, 2D/3D noise reduction, Anti-fog | + | *BLC, DOL-WDR, 2D/3D noise reduction, Anti-fog |
− | * Brightness, Contrast, Sharpness, Saturation adjustable | + | *Brightness, Contrast, Sharpness, Saturation adjustable |
− | * Support Raspberry PI, FPGA, ZYNQ, RK3288, RK3399, TK1 | + | *Support Raspberry PI, FPGA, ZYNQ, RK3288, RK3399, TK1 |
| + | |
| + | [[File:VEYE-MIPI-290327-FRONT.jpg|thumb|front]] |
| + | [[File:VEYE-MIPI-290327-back.jpg|thumb|back]] |
| | | |
| ===Thechnical Detail=== | | ===Thechnical Detail=== |
Line 110: |
Line 113: |
| |38mm*38mm*8mm(not include lens and lens mount) | | |38mm*38mm*8mm(not include lens and lens mount) |
| |} | | |} |
| + | [[File:VEYE-290327-用户接口实物图.png|thumb|connector position]] |
| + | [[File:VEYE-290-327用户接口丝印图.png|thumb|pin number]] |
| + | [[File:VEYE-MIPI-尺寸图-后视.png|thumb|dimension]] |
| | | |
| ===Diagram, Layout and Dimension=== | | ===Diagram, Layout and Dimension=== |