Difference between revisions of "VEYE-MIPI-290/327"

From wiki_veye
Jump to navigation Jump to search
Line 118: Line 118:
 
|}
 
|}
 
==Diagram, Layout and Dimension==
 
==Diagram, Layout and Dimension==
[[File:VEYE-MIPI-290-327接口图.jpg|thumb|VEYE-MIPI-290/327 User Interface|alt=|700x700px]]<br />
+
[[File:VEYE-MIPI-290-327接口图.jpg|thumb|VEYE-MIPI-290/327 User Interface|alt=|700x700px]]
 
{| class="wikitable"
 
{| class="wikitable"
 
| colspan="6" |'''J5 : CSI-2 (MIPI) Interface'''
 
| colspan="6" |'''J5 : CSI-2 (MIPI) Interface'''

Revision as of 09:56, 16 April 2020

查看中文

VEYE-MIPI-290/VEYE-MIPI-327 Data Sheet

1 Introduction

VEYE-MIPI-290/VEYE-MIPI-327 is a camera module with excellent low illumination and wide dynamic performance.This module only has 38*38*8mm, which is convenient for integration and can be connected to various embedded motherboards with adapter board.Suitable for machine vision, intelligent analysis, industrial control, face recognition, ADAS etc...

2 Features

  • 1/2.8 inch 2 Mega STARVIS sensor IMX290/IMX327 by SONY
  • MIPI output: CSI-2 (VEYE-MIPI-290/VEYE-MIPI-327 support)
  • Uncompressed UYVY format, YUV422-8bit
  • Standard lens mount
  • IR-CUT circuit
  • Stream mode and Capture mode
  • Framerate control
  • BLC, DOL-WDR, 2D/3D noise reduction, Anti-fog
  • Brightness, Contrast, Sharpness, Saturation adjustable
  • Support Raspberry PI, FPGA, ZYNQ, RK3288, RK3399, JETSON NANO,TX2
front
back

3 Thechnical Detail

Technical Details
SENSOR
Sensor SONY IMX290LQR-C/IMX327LQR-C STARVIS
Pixels 2.07M pixels
Resolution 1920*1080
Image Size Diagonal 6.46 mm (Type 1/2.8)
Unit Cell Size 2.9um (H)*2.9um(V)
SNR1s Value 0.23lx / 0.18lx
ISP
Frame Rate 1080p@25 / 1080p@30fps
Exposure Auto or Manual
White Balance Auto or Manual
Shutter 1/25(1/30)s to 1/50,000s
Slow Shutter Support
Denoising 2D/3D noise reduction
Image Setting Brightness, Contrast, Sharpness, Saturation,Flip, Mirror
Image Enhancement BLC, DOL-WDR, Defog
Day/Night Switch Manual or IR-CUT filter with external trigger
Lens & IR-CUT
Lens MTV12 / MTV16 / CS
Lens Mount M12*P0.5 / M16*P0.5 / CS,IRCUT is optional
Mounting Hole 2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing
Interface
PCB Connector BTB connector:BTB050040-F1D
Communication Interface IIC, 3.3VDC
Video Data Interface MIPI:2 Data Lanes, CSI2 YUV422-8bit Data Type, Bandwidth 1.188Gbps
IR-CUT Control IR-CUT motor control, 3.3VDC
Day/Night External Trigger 3.3VDC to 12VDC compatibility
General
Operating Conditions -10℃~50℃, Humidity 95% or less, non-condensing
Power Supply 3.3VDC
Power Consumption 1.2W
Dimension 38mm*38mm*8mm(not include lens and lens mount)

4 Diagram, Layout and Dimension

VEYE-MIPI-290/327 User Interface
J5 : CSI-2 (MIPI) Interface
Pin NO. NAME Remarks Pin NO. NAME Remarks
1 RESERVE NC 2 RESERVE NC
3 GND 4 RESERVE NC
5 RESERVE NC 6 RESERVE NC
7 RESERVE NC 8 RESERVE NC
9 GND 10 GND
11 RESERVE NC 12 RESERVE NC
13 RESERVE NC 14 RESERVE NC
15 GND 16 GND
17 MIPI_CK_P 18 SCL 3.3V Level
19 MIPI_CK_N 20 SDA 3.3V Level
21 GND 22 RESERVE NC
23 MIPI_L1_P 24 RESERVE NC
25 MIPI_L1_N 26 RESERVE NC
27 GND 28 RESERVE NC
29 MIPI_L0_P 30 RESERVE NC
31 MIPI_L0_N 32 RESERVE NC
33 GND 34 GND
35 GND 36 GND
37 VCC3V3 PWR IN 38 VCC3V3 PWR IN
39 VCC3V3 PWR IN 40 VCC3V3 PWR IN
J3 : Day/Night External Trigger
Pin NO. NAME Remarks
1 Day&Night Signal In INPUT,Active High(Image to MONO),3.3VDC to 12VDC compatibility
2 GND
3 NC
J4 : IRCUT Control
Pin NO. NAME Remarks
1 IRCUT1
2 IRCUT2
J4 : IRCUT Control Functional specifications
MODE PIN Signal polarity Image type Filter position
Mode 1 IRCUT1 + color Infrared cutoff
IRCUT2 -
Mode 2 IRCUT1 - mono Full wavelength pass
IRCUT2 +
  • Board Dimension
VEYE-MIPI-290-327 CAD drawing unit : mm

Download dwg file here

3D freecad file

5 Imaging Effect

6 CPU boards

Support a variety of platforms, as follows:

7 Resources

8 Update Log