2,021
edits
Changes
Jump to navigation
Jump to search
Line 17:
Line 17: + + Line 144:
Line 146: − + − − + + Line 179:
Line 181: − + Line 188:
Line 190: − + Line 200:
Line 202: − + Line 258:
Line 260: − + − For Jetpack5.1.1:+ Line 359:
Line 361: − prebuilt Image on github:https://github.com/veyeimaging/nvidia_jetson_veye_bsp/tree/master/kernel_image+ Line 749:
Line 751: + + + + +
→Overview
*Jetpack4.6.2,L4T r32.7.2
*Jetpack4.6.2,L4T r32.7.2
*Jetpack4.6.3,L4T r32.7.3
*Jetpack4.6.3,L4T r32.7.3
*Jetpack4.6.4,L4T r32.7.4
*Jetpack5.0.1DP, L4T r34.1.1
*Jetpack5.0.1DP, L4T r34.1.1
*Jetpack5.0.2, L4T r35.1
*Jetpack5.0.2, L4T r35.1
*Jetpack5.1,L4T r35.2.1
*Jetpack5.1,L4T r35.2.1
*Jetpack5.1.1,L4T r35.3.1
*Jetpack5.1.1,L4T r35.3.1
*Jetpack5.1.2,L4T r35.4.1
We provide two ways to do so: '''Prebuilt Binaries''' or '''Source Code. Yes, It's Open Source!'''
We provide two ways to do so: '''Prebuilt Binaries''' or '''Source Code. Yes, It's Open Source!'''
=====Nano A02=====
=====Nano A02=====
<code>tegra210-p3448-0000-p3449-0000-a02.dtb</code>
<code>tegra210-p3448-0000-p3449-0000-a02.dtb</code>
=====Nano B01 Devkit=====
===== Nano B01 =====
<code>tegra210-p3448-0000-p3449-0000-b00.dtb</code>
<code>tegra210-p3448-0000-p3449-0000-b00.dtb</code>
=====Nano B01 4G emmc=====
<code>tegra210-p3448-0002-p3449-0000-b00.dtb</code>
===== Nano 2GB =====
===== Nano 2GB =====
<code>tegra210-p3448-0003-p3542-0000.dtb</code>
<code>tegra210-p3448-0003-p3542-0000.dtb</code>
<code>tegra234-p3767-0000-p3768-0000-a0.dtb</code>
<code>tegra234-p3767-0000-p3768-0000-a0.dtb</code>
*Jetson Xavier NX 8G (P3767-0001):
*Jetson Orin NX 8G (P3767-0001):
<code>tegra234-p3767-0001-p3768-0000-a0.dtb</code>
<code>tegra234-p3767-0001-p3768-0000-a0.dtb</code>
<code>tegra234-p3767-0003-p3768-0000-a0.dtb</code>
<code>tegra234-p3767-0003-p3768-0000-a0.dtb</code>
*Jetson Xavier Nano 4G (P3767-0004):
*Jetson Orin Nano 4G (P3767-0004):
<code>tegra234-p3767-0004-p3768-0000-a0.dtb</code>
<code>tegra234-p3767-0004-p3768-0000-a0.dtb</code>
2, The ones with fpdlink as suffix correspond to fpdlink coaxial model module.
2, The ones with fpdlink as suffix correspond to fpdlink coaxial model module.
3，MV-MIPI-MVCAM is the common dtb for all MV series and RAW series cameras.
3，MV-MIPI-MVCAM is the common dtb for all MV series and RAW series cameras, excluding RAW-MIPI-AR0234M and RAW-MIPI-IMX462M..
====Upgrade directly on the jetson board====
====Upgrade directly on the jetson board====
<code>sudo cp nvidia_jetson_veye_bsp/ko/$(uname -r)/* /lib/modules/$(uname -r)/kernel/drivers/media/i2c/ -f</code>
<code>sudo cp nvidia_jetson_veye_bsp/ko/$(uname -r)/* /lib/modules/$(uname -r)/kernel/drivers/media/i2c/ -f</code>
Specially，for Jetpack5.1:
'''Specially，for Jetpack5.1 version''':
<code>sudo cp nvidia_jetson_veye_bsp/ko/5.10.104-tegra-l4t35.2.1/* /lib/modules/$(uname -r)/kernel/drivers/media/i2c/ -f</code>
<code>sudo cp nvidia_jetson_veye_bsp/ko/5.10.104-tegra-l4t35.2.1/* /lib/modules/$(uname -r)/kernel/drivers/media/i2c/ -f</code>
'''Specially，for Jetpack5.1.1 version''':
<code>sudo cp nvidia_jetson_veye_bsp/ko/5.10.104-tegra-l4t35.3.1/* /lib/modules/$(uname -r)/kernel/drivers/media/i2c/ -f</code>
<code>sudo cp nvidia_jetson_veye_bsp/ko/5.10.104-tegra-l4t35.3.1/* /lib/modules/$(uname -r)/kernel/drivers/media/i2c/ -f</code>
<code>export RELEASE_PACK_DIR=$L4T_DIR/nvidia_jetson_veye_bsp</code>
<code>export RELEASE_PACK_DIR=$L4T_DIR/nvidia_jetson_veye_bsp</code>
=====Upgrade Image and DTB=====
=====Upgrade Image and DTB=====
Extract the downloaded `nvidia_jetson_veye_bsp.tar.gz`, and locate the Image corresponding to the specific version.
*Installing the Kernel
*Installing the Kernel
==== VEYE cameras on Jetpack5.x ====
==== VEYE cameras on Jetpack5.x ====
Jetpack5.x has more stringent requirements for mipi signals in xavier and orin platforms. VEYE-MIPI-xxx series cameras need firmware hdver>=7 to be perfectly supported.
Jetpack5.x has more stringent requirements for mipi signals in xavier and orin platforms. VEYE-MIPI-xxx series cameras need firmware hdver>=7 to be perfectly supported.
==== CS-MIPI-IMX307 combined with Orin nano and Orin NX Green Screen ====
When CS-MIPI-IMX307 is powered by the 3.3V mode of the FFC cable, the MIPI receiver state machine of Orin nano and Orin NX (Jetpack5.1.1) will enter an incorrect state.
It is recommended to refer to this [[Power supply mode switching|article]] and modify the power supply mode of CS-MIPI-IMX307 to use the 5V power supply mode.
==== Jetpack5.0.1 DP ====
==== Jetpack5.0.1 DP ====