2,020
edits
Changes
Jump to navigation
Jump to search
Line 218:
Line 218: − + Line 225:
Line 225: − + − 把新的Image拷贝的TX2的/boot/目录下。+ Line 260:
Line 260: + + + +
VEYE CS Camera for Jetson TX2/zh (view source)
Revision as of 11:43, 24 August 2020
, 11:43, 24 August 2020→使用预编译好Image和DTB
<code>export RELEASE_PACK_DIR=$L4T_DIR/nvidia_jetson_veye_bsp</code>
<code>export RELEASE_PACK_DIR=$L4T_DIR/nvidia_jetson_veye_bsp</code>
=====使用预编译好Image和DTB=====
=====升级Image和DTB=====
prebuilt Image on github:https://github.com/veyeimaging/nvidia_jetson_veye_bsp/tree/master/kernel_image
prebuilt Image on github:https://github.com/veyeimaging/nvidia_jetson_veye_bsp/tree/master/kernel_image
无论是使用预编译好的程序还是使用自行编译出的Image：
无论是使用预编译好的程序还是使用自行编译出的Image：
''- TX2''
''- Nano 和 TX2''
把新的Image拷贝的Nano和TX2的/boot/目录下。
在Jetson TX2板子上执行
在Jetson TX2板子上执行
<code>cd $L4T_DIR</code>
<code>cd $L4T_DIR</code>
- ''Nano''
<code>sudo ./flash.sh -r -k DTB jetson-nano-qspi-sd mmcblk0p1</code>
''- TX2''
''- TX2''