1,602
edits
Changes
Jump to navigation
Jump to search
Line 80:
Line 80: − ====Applications and Test====+ − =====Check system status=====+ Line 123:
Line 123: − =====List the modes supported by the camera=====+
VEYE CS Camera on AVNET Maaxboard (view source)
Revision as of 15:49, 20 April 2021
, 15:49, 20 April 2021→Applications and Test
Then insert the TF card into the Maaxboard board and power it up again.
Then insert the TF card into the Maaxboard board and power it up again.
===Applications and Test===
====Check system status====
Run the following command to confirm whether the camera is probed.
Run the following command to confirm whether the camera is probed.
The cameras of the MIPI-CSI2 interface is identified and mounted to i2-0.
The cameras of the MIPI-CSI2 interface is identified and mounted to i2-0.
====List the modes supported by the camera====
<code>v4l2-ctl --list-formats-ext -d /dev/video<0/1></code>
<code>v4l2-ctl --list-formats-ext -d /dev/video<0/1></code>
====Video Stream test====
====Video Stream test====