2,577
edits
Changes
Jump to navigation
Jump to search
增加一系列isp参数
Line 263:
Line 263:
Trigger pin Low(GND),Image is Color Mode and IR-CUT status '''Bolck''' infrared.
Trigger pin Low(GND),Image is Color Mode and IR-CUT status '''Bolck''' infrared.
+=====hue=====
+<code>./cs_mipi_i2c.sh -r -f hue</code>
+
+<code>./cs_mipi_i2c.sh -w -f hue -p1 50</code>
+
+hue，range [0,100].
+
+=====contrast=====
+<code>./cs_mipi_i2c.sh -r -f contrast</code>
+
+<code>./cs_mipi_i2c.sh -w -f contrast-p1 50</code>
+
+contrast，range [0,100].
+
+=====satu=====
+<code>./cs_mipi_i2c.sh -r -f satu</code>
+
+<code>./cs_mipi_i2c.sh -w -f satu-p1 50</code>
+
+saturation，range [0,100].
+
+=====aemode=====
+<code>./cs_mipi_i2c.sh -r -f aemode</code>
+
+<code>./cs_mipi_i2c.sh -w -f aemode -p1 0</code>
+
+0 : auto exposure
+
+1: manual exposure
+
+=====metime=====
+<code>./cs_mipi_i2c.sh -r -f metime</code>
+
+<code>./cs_mipi_i2c.sh -w -f metime -p1 10000</code>
+
+manual exposure time, us.
+
+=====meagain =====
+<code>./cs_mipi_i2c.sh -w -f meagain -p1 X -p2 Y</code>
+
+<code>./cs_mipi_i2c.sh -r -f meagain</code>
+
+manual again，dB. Should set '''aemode''' to manual first.
+
+X is the integer part and Y is the decimal part, for example X is 2 and Y is 3 means 2.3dB.
+
+X range: depending on sensor.
+
+Y range: [0-9].
+
+=====medgain =====
+<code>./cs_mipi_i2c.sh -w -f medgain -p1 X -p2 Y</code>
+
+<code>./cs_mipi_i2c.sh -r -f medgain</code>
+
+manual dgain，dB. Should set '''aemode''' to manual first.
+
+X is the integer part and Y is the decimal part, for example X is 2 and Y is 3 means 2.3dB.
+
+X range: depending on sensor.
+
+Y range: [0-9].
+
+=====awbmode=====
+<code>./cs_mipi_i2c.sh -r -f awbmode</code>
+
+<code>./cs_mipi_i2c.sh -w -f awbmode -p1 0</code>
+
+0 : auto white balance
+
+1: manual white balance, gain mode
+
+2: manual white balance, color temperature mode
+
+===== mwbgain =====
+<code>./cs_mipi_i2c.sh -w -f mwbgain -p1 RGAIN -p2 BGAIN</code>
+
+<code>./cs_mipi_i2c.sh -r -f mwbgain</code>
+
+manual white balance mode, set rgain and dgain manually, ggain is always 1.
+
+GAIN is 4-bit decimal precision, for example: 0x23 means 2+3/16=2.19.
+
+===== mwbcolortemp =====
+<code>./cs_mipi_i2c.sh -w -f mwbcolortemp -p1 3200</code>
+
+<code>./cs_mipi_i2c.sh -r -f mwbcolortemp</code>
+
+manual white balance, color temperature mode, color tempture,range [1500,15000]
+
+===== expostate =====
+<code>./cs_mipi_i2c.sh -r -f expostate</code>
+
+readonly, get the current exposure state. exposure time, again and dgain.
+
+===== wbstate =====
+<code>./cs_mipi_i2c.sh -r -f wbstate</code>
+
+readonly, get the current white balance state. rgain, bgain and color tempture.