1,602
edits
Changes
Jump to navigation
Jump to search
Mv series camera appnotes 4 rpi (view source)
Revision as of 14:25, 14 April 2022
, 14:25, 14 April 2022no edit summary
Line 1:
Line 1:
[[Mv series camera appnotes 4 rpi/zh|查看中文]]
[[Mv series camera appnotes 4 rpi/zh|查看中文]]
+
+=== Introduction ===
+The MV series cameras are cameras introduced for AI applications in the industrial field. It uses the MIPI CSI-2 interface, which is especially suitable for embedded computing platforms.
+
+It features rich data formats and trigger characteristics, extremely low latency, extremely high bandwidth and reliable stability.
+
+This article describes how to use the MV series camera on the Raspberry Pi platform.
+
+==== Camera module list ====
+{| class="wikitable"
+!Series
+!Model
+!Status
+|-
+|MV series
+|MV-MIPI-IMX178M
+|Done
+|}
+
+=== Hardware Setup ===
+MV series cameras need to use ADP-MV1 adapter board in order to connect to Raspberry Pi.
+
+We take MV-MIPI-IMX178M as an example to introduce the hardware installation method.
+
+==== Connection of MV-MIPI-IMX178M and ADP-MV1 ====
+The two are connected using 0.5 mm pitch*30P FFC cable with opposite direction. The cable must be inserted with the silver contacts facing outside.
+
+(TODO picture)
+
+==== Connection of ADP-MV1 to Raspberry Pi ====
+
+===== Power supply =====
+The ADP-MV1 requires a separate 5V power supply and can be powered directly from the Raspberry Pi motherboard using a Dupont cable.
+
+(TODO picture)
+
+===== Raspberry Pi Model B and B+ =====
+The two are connected using 1.0 mm pitch*15P FFC cable with opposite direction. Pay attention to the silver contacts facing side.
+
+(TODO picture)
+
+===== Raspberry Pi Zero, Zero W and Computer Module =====
+The two are connected using 15Pto22P FFC cable with same direction. Pay attention to the silver contacts facing side.
+
+(TODO picture)
+<br />