1,602
edits
Changes
Jump to navigation
Jump to search
Mv series camera appnotes 4 rpi (view source)
Revision as of 10:29, 5 March 2023
, 10:29, 5 March 2023→Notes for CM4
Line 433:
Line 433:
====Notes for CM4 ====
====Notes for CM4 ====
Cm4 supports the use of two cameras at the same time. Following above steps will only be able to use CAM1. To use two cameras, follow the following steps:
Cm4 supports the use of two cameras at the same time. Following above steps will only be able to use CAM1. To use two cameras, follow the following steps:
+
+===== Hardware Connection =====
+Refer to [https://www.raspberrypi.com/documentation/computers/compute-module.html this Raspberry Pi instruction] ， add jumper to J6.
+
===== Upgrade dt-blob.bin=====
===== Upgrade dt-blob.bin=====
<code>sudo wget <nowiki>https://datasheets.raspberrypi.com/cmio/dt-blob-dualcam.bin</nowiki> -O /boot/dt-blob.bin</code>
<code>sudo wget <nowiki>https://datasheets.raspberrypi.com/cmio/dt-blob-dualcam.bin</nowiki> -O /boot/dt-blob.bin</code>