2,573
edits
Changes
Jump to navigation
Jump to search
Mv series camera appnotes 4 jetson (view source)
Revision as of 17:26, 29 August 2023
, 17:26, 29 August 2023→Connection of MV-MIPI-CAM and ADP-MV1
Line 330:
Line 330:
+
+==== Connection using ADP-MV1 ====+
−===== Power supply =====
<br />
−<br />+
−
+
|N/A
|N/A
|}
|}
−==== Connection of MV-MIPI-CAM and ADP-MV1 ====
+==== MV series cameras use the ADP-MV1 connection ====
+===== Connection of MV series cameras and ADP-MV1 =====
The two are connected using 0.5 mm pitch*30P FFC cable with opposite direction. The cable must be inserted with the silver contacts facing outside.
The two are connected using 0.5 mm pitch*30P FFC cable with opposite direction. The cable must be inserted with the silver contacts facing outside.
{| class="wikitable"
{| class="wikitable"
Line 340:
Line 343:
|}
|}
−==== Power supply ====
−The ADP-MV1 requires a separate 5V power supply and can be powered directly from the Jetson board using a Dupont cable.
The ADP-MV1 requires a separate 5V power supply and can be powered directly from the Jetson board using a Dupont cable.
[[File:ADP-MV1-MV-MIPI-X 07.jpg|alt=ADP-MV1 power supply|center|thumb|800x800px|ADP-MV1 power supply]]
[[File:ADP-MV1-MV-MIPI-X 07.jpg|alt=ADP-MV1 power supply|center|thumb|800x800px|ADP-MV1 power supply]]
−==== Connection with Nano and NX using ADP-MV1 ====
+===== Connection with Nano and NX using ADP-MV1 =====
The Nano Series and NX Series are connected in this way.
The Nano Series and NX Series are connected in this way.
[[File:MV camera and Xavier NX connection.jpg|alt=MV camera and Xavier NX connection|center|thumb|800x800px|MV camera and Xavier NX connection]]
[[File:MV camera and Xavier NX connection.jpg|alt=MV camera and Xavier NX connection|center|thumb|800x800px|MV camera and Xavier NX connection]]
Line 354:
Line 354:
Use a 15P to 22 pin FFC Cable with the same side wire connection. Pay attention to the direction of the contact surface.
Use a 15P to 22 pin FFC Cable with the same side wire connection. Pay attention to the direction of the contact surface.
[[File:MV camera connect to Orin Nano and Orin NX.jpg|center|thumb|800x800px|MV camera connect to Orin Nano and Orin NX]]
[[File:MV camera connect to Orin Nano and Orin NX.jpg|center|thumb|800x800px|MV camera connect to Orin Nano and Orin NX]]
−==== Connection of MV-MIPI-CAM and ADP-N4 ====
+==== MV series cameras use the ADP-N4 connection ====
+===== Connection of MV series cameras and ADP-N4 =====
The two are connected using 0.5 mm pitch*30P FFC cable with same direction. The cable must be inserted with the silver contacts facing outside.
The two are connected using 0.5 mm pitch*30P FFC cable with same direction. The cable must be inserted with the silver contacts facing outside.
[[File:ADP-N4 and MV-MIPI-CAM.jpg|link=http://wiki.veye.cc/index.php/File:ADP-N4%20and%20MV-MIPI-CAM.jpg|center|thumb|800x800px|MV-MIPI-CAM to ADP-N4]]
[[File:ADP-N4 and MV-MIPI-CAM.jpg|link=http://wiki.veye.cc/index.php/File:ADP-N4%20and%20MV-MIPI-CAM.jpg|center|thumb|800x800px|MV-MIPI-CAM to ADP-N4]]
Line 366:
Line 368:
* 12V DC is connected to J11, which needs to be powered by an external adapter.
* 12V DC is connected to J11, which needs to be powered by an external adapter.
−===== Connection with TX2 Devkitand AGX Series using ADP-MV1 =====
+===== Connection with TX2 Devkit and AGX Series using ADP-MV4 =====
[[File:ADP-N4 to AGX XAVIER.jpg|alt=ADP-N4 to AGX XAVIER|center|thumb|800x800px|ADP-N4 to AGX XAVIER]]
[[File:ADP-N4 to AGX XAVIER.jpg|alt=ADP-N4 to AGX XAVIER|center|thumb|800x800px|ADP-N4 to AGX XAVIER]]
[[File:ADP-N4 to AGX Orin.jpg|center|thumb|800x800px|ADP-N4 to AGX Orin]]
[[File:ADP-N4 to AGX Orin.jpg|center|thumb|800x800px|ADP-N4 to AGX Orin]]