2,571
edits
Changes
Jump to navigation
Jump to search
VEYE CS Camera on Radxa Boards (view source)
Revision as of 17:28, 24 April 2024
, 17:28, 24 April 2024→Connection of Camera and Radxa ZERO 3W Board
Line 27:
Line 27:
The two are connected using 1.0 mm pitch*15P FFC cable with opposite direction. The cable must be inserted with the silver contacts facing outside.
Radxa ZERO 3W provides a 22-pin connector compatible with Raspberry Pi, allowing our camera to be installed on its motherboard without the need for an adapter board.
Radxa ZERO 3W provides a 22-pin connector compatible with Raspberry Pi, allowing our camera to be installed on its motherboard without the need for an adapter board.
====Connection of Camera and Radxa ZERO 3W Board====
====Connection of Camera and Radxa ZERO 3W Board====
−Both use a 15-to-22-pin FFC cable for connection, ensuring that the silver contact surface faces outward.
Both use a 15-to-22-pin FFC cable for connection, ensuring that the silver contact surface faces outward.