Changes

|'''Camera Support 支持的相机'''

|'''Camera Support 支持的相机'''

|-

|-

|[[File:C-MOUNT-01-03.jpg|alt=|center|thumb|300x300px|'''C-MOUNT01''']]

|[[File:C-MOUNT-01-03.jpg|alt=|center|thumb|300x300px|'''C-MOUNT03''']]

|[[File:C-MOUNT-01-02.jpg|alt=|center|thumb|300x300px|'''C-MOUNT01''']]

|[[File:C-MOUNT-01-02.jpg|alt=|center|thumb|300x300px|'''C-MOUNT03''']]

|[[MV-MIPI-IMX178 Index|'''MV-MIPI-IMX178M''']]

|[[MV-MIPI-IMX178 Index|'''MV-MIPI-IMX178M''']]

[[MV-MIPI-SC130M Index|'''MV-MIPI-SC130M''']]

[[MV-MIPI-SC130M Index|'''MV-MIPI-SC130M''']]

=== Overview 概述 ===

=== Overview 概述 ===

C-MOUNT01仅仅是一个C-MOUNT镜头固定座，为了适配MV系列和RAW系列摄像机，'''''<u>实际后焦法兰焦距略小于17.526mm</u>'''''，配合不同型号的摄像机模组，需要将镜头向远离传感器的方向调整。具体数值需要根据传感器的成像面高度决定。

C-MOUNT03针对C-MOUNT01后截距进行了优化。

C-MOUNT01 is only a C-MOUNT lens mount. In order to fit the MV series and RAW series camera, '''''<u>the actual Flange BFL distance is less than 17.526mm</u>'''''. With different camera modules,  

 

C-MOUNT03 is optimized for the post-intercept of C-MOUNT01.

 

C-MOUNT03 is only a C-MOUNT lens mount. In order to fit the MV series and RAW series camera, '''''<u>the actual Flange BFL distance is less than 17.526mm</u>'''''. With different camera modules,  

the lens needs to be adjusted away from the sensor. The specific value needs to be determined according to the sensor's imaging surface height.

the lens needs to be adjusted away from the sensor. The specific value needs to be determined according to the sensor's imaging surface height.

==Dimension 尺寸图==

==Dimension 尺寸图==

<br />

<br />

== 2D 文件 ==

== 2D 文件 ==

[[Media:C-mount-01001 2D.zip|Download 2D file here]]

Download 2D file here

== 3D 文件 ==

== 3D 文件 ==

[[Media:C-mount-01001 3D.zip|Download 3D file here]]

Download 3D file here