2,064
edits
Changes
Jump to navigation
Jump to search
USB firmware update app note (view source)
Revision as of 15:16, 1 December 2019
, 15:16, 1 December 2019Created page with "This AN introduces how to upgrade the firmware of camera module by using U disk through USB interface. === Applicable Product modles === *CS-MIPI-IMX307 *CS-LVDS-IMX307 *CS..."
This AN introduces how to upgrade the firmware of camera module by using U disk through USB interface.
=== Applicable Product modles ===
*CS-MIPI-IMX307
*CS-LVDS-IMX307
*CS-USB-IMX307
*CS-MIPI-SC132
*CS-LVDS-SC132
*CS-USB-SC132
=== How to upgrade camera firmware using USB disk ===
==== Prepare ====
* Get the upgrade file via [https://pan.baidu.com/s/1ri5r07ObBs1wATigTK-rag?errno=0&errmsg=Auth%20Login%20Sucess&&bduss=&ssnerror=0&traceid=#list/path=%2F link],or other way. The default file name is ProductMode_Version_Releasedata.bin.
* Formatting your Usb Disk to FAT32.
* Rename upgrade file name to '''dimaging_upgrade.bin''' and copy to root dir of USB disk.
Upgrading
* Plug in the USB disk as shown belown when power off.
[[File:CS-USB-IMX307 Upgrade mode.jpg|center|thumb|600x600px|CS-USB-IMX307 |link=http://wiki.veye.cc/index.php/File:CS-USB-IMX307_Upgrade_mode.jpg]][[File:CS-MIPI-IMX307 Upgrade mode.jpg|center|thumb|600x600px|CS-MIPI-IMX307 |link=http://wiki.veye.cc/index.php/File:CS-MIPI-IMX307_Upgrade_mode.jpg]]
* Power on. Notice that USB camera modules using power port instead of commonly used USB port.
* The camera module will check the upgrade file. If LED light ON for 500ms and OFF, means upgrading begin. If LED ON for > 2s, means upgrade file wrong.
* LED ON and OFF for 3 times， means upgrading OK. Power off.
* If LED stays ON， this means upgrading failed，please check the upgrade file.
=== Applicable Product modles ===
*CS-MIPI-IMX307
*CS-LVDS-IMX307
*CS-USB-IMX307
*CS-MIPI-SC132
*CS-LVDS-SC132
*CS-USB-SC132
=== How to upgrade camera firmware using USB disk ===
==== Prepare ====
* Get the upgrade file via [https://pan.baidu.com/s/1ri5r07ObBs1wATigTK-rag?errno=0&errmsg=Auth%20Login%20Sucess&&bduss=&ssnerror=0&traceid=#list/path=%2F link],or other way. The default file name is ProductMode_Version_Releasedata.bin.
* Formatting your Usb Disk to FAT32.
* Rename upgrade file name to '''dimaging_upgrade.bin''' and copy to root dir of USB disk.
Upgrading
* Plug in the USB disk as shown belown when power off.
[[File:CS-USB-IMX307 Upgrade mode.jpg|center|thumb|600x600px|CS-USB-IMX307 |link=http://wiki.veye.cc/index.php/File:CS-USB-IMX307_Upgrade_mode.jpg]][[File:CS-MIPI-IMX307 Upgrade mode.jpg|center|thumb|600x600px|CS-MIPI-IMX307 |link=http://wiki.veye.cc/index.php/File:CS-MIPI-IMX307_Upgrade_mode.jpg]]
* Power on. Notice that USB camera modules using power port instead of commonly used USB port.
* The camera module will check the upgrade file. If LED light ON for 500ms and OFF, means upgrading begin. If LED ON for > 2s, means upgrade file wrong.
* LED ON and OFF for 3 times， means upgrading OK. Power off.
* If LED stays ON， this means upgrading failed，please check the upgrade file.