Difference between revisions of "MV-MIPI-IMX287M Version Log"
Jump to navigation
Jump to search
(Created page with "==How to get version== MV-MIPI-IMX287M has two version number, Using shell script ,get '''version'''. '''L version''' is logic version，'''C v...") |
|||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 7: | Line 7: | ||
==Version Log== | ==Version Log== | ||
| − | *'''MV-MIPI-IMX287M_C1. | + | *'''MV-MIPI-IMX287M_C1.28_L1.33_upgrade_20230327.bin''' |
#First release version. | #First release version. | ||
| + | |||
| + | * '''MV-MIPI-IMX287M_C1.34_L2.02_upgrade_20231024.bin''' | ||
| + | |||
| + | # Increased the image processing speed of the ISP module, resulting in an enhanced maximum frame rate. | ||
| + | # Removed the UYVY data type. | ||
| + | # D-PHY reset only triggers a power-on reset once, ensuring that each lane is in the LP11 state, which is beneficial for the initialization of the MIPI-RX end, such as Zynq. | ||
| + | |||
| + | * '''MV-MIPI-IMX287M_C1.41_L2.06_upgrade_20240605.bin''' | ||
| + | |||
| + | # In stream mode, the strobe signal is also output. | ||
| + | # Realize precise strobe signal output with very short exposure time. | ||
| + | |||
| + | * '''MV-MIPI-IMX287M_C1.43_L2.07_upgrade_20240910.bin''' | ||
| + | |||
| + | # Add Pulse trigger mode. | ||
| + | # Add frame count function. | ||
Latest revision as of 11:33, 13 September 2024
1 How to get version
MV-MIPI-IMX287M has two version number, Using shell script ,get version.
L version is logic version，C version is controller version.
2 Upgrade package download
CS Serials Camera Upgrade Images（Mediafire）
3 Version Log
- MV-MIPI-IMX287M_C1.28_L1.33_upgrade_20230327.bin
- First release version.
- MV-MIPI-IMX287M_C1.34_L2.02_upgrade_20231024.bin
- Increased the image processing speed of the ISP module, resulting in an enhanced maximum frame rate.
- Removed the UYVY data type.
- D-PHY reset only triggers a power-on reset once, ensuring that each lane is in the LP11 state, which is beneficial for the initialization of the MIPI-RX end, such as Zynq.
- MV-MIPI-IMX287M_C1.41_L2.06_upgrade_20240605.bin
- In stream mode, the strobe signal is also output.
- Realize precise strobe signal output with very short exposure time.
- MV-MIPI-IMX287M_C1.43_L2.07_upgrade_20240910.bin
- Add Pulse trigger mode.
- Add frame count function.