Difference between revisions of "MV-MIPI-IMX287M Version Log"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
'''L version''' is logic version，'''C version''' is controller version. | '''L version''' is logic version，'''C version''' is controller version. | ||
==Upgrade package download== | ==Upgrade package download== | ||
| − | [https://www.mediafire.com/folder/4tov5s500gaif/camera_firmware_upgrade_images | + | [https://www.mediafire.com/folder/4tov5s500gaif/camera_firmware_upgrade_images Camera Upgrade Images（Mediafire）] |
==Version Log== | ==Version Log== | ||
Latest revision as of 17:26, 10 January 2025
1 How to get version
MV-MIPI-IMX287M has two version number, Using shell script ,get version.
L version is logic version，C version is controller version.
2 Upgrade package download
Camera Upgrade Images（Mediafire）
3 Version Log
- MV-MIPI-IMX287M_C1.28_L1.33_upgrade_20230327.bin
- First release version.
- MV-MIPI-IMX287M_C1.34_L2.02_upgrade_20231024.bin
- Increased the image processing speed of the ISP module, resulting in an enhanced maximum frame rate.
- Removed the UYVY data type.
- D-PHY reset only triggers a power-on reset once, ensuring that each lane is in the LP11 state, which is beneficial for the initialization of the MIPI-RX end, such as Zynq.
- MV-MIPI-IMX287M_C1.41_L2.06_upgrade_20240605.bin
- In stream mode, the strobe signal is also output.
- Realize precise strobe signal output with very short exposure time.
- MV-MIPI-IMX287M_C1.43_L2.07_upgrade_20240910.bin
- Add Pulse trigger mode.
- Add frame count function.