Difference between revisions of "ADP-U1 Adapter Board Data Sheet"
Jump to navigation
Jump to search
| Line 14: | Line 14: | ||
|'''SKETCH MAP/示意图''' | |'''SKETCH MAP/示意图''' | ||
|- | |- | ||
| − | |''' | + | |'''ADP-U1''' |
|[[File:ADP-U1 001.jpg|alt=|center|thumb|200x200px|'''ADP-U1''']] | |[[File:ADP-U1 001.jpg|alt=|center|thumb|200x200px|'''ADP-U1''']] | ||
|[[File:ADP-U1 002.jpg|alt=|center|thumb|200x200px|'''ADP-U1''']] | |[[File:ADP-U1 002.jpg|alt=|center|thumb|200x200px|'''ADP-U1''']] | ||
Revision as of 16:01, 14 April 2020
Adapter Board:ADP-U1 Data Sheet
1 Introduction
The function of ADP-U1 is to convert the FPC15 interface of the CS-MIPI-IMX307 camera module to the FPC28 interface of ADP-N1(a camera interposer module for AGX Xavier/TX2 DevKit).
2 Product Picture
| PART NUMBER / 型号 | FRONT VIEW / 正面图片 | BACK VIEW / 背面图片 | FFC CABLE/FFC线缆 | SKETCH MAP/示意图 |
| ADP-U1 |
3 Adapter Board Pinlist
| 1 | GND | |
| 2 | RESERVE | Not Connected |
| 3 | RESERVE | Not Connected |
| 4 | GND | |
| 5 | RESERVE | Not Connected |
| 6 | RESERVE | Not Connected |
| 7 | GND | |
| 8 | MIPI_CK_P | |
| 9 | MIPI_CK_N | |
| 10 | GND | |
| 11 | MIPI_L1_P | |
| 12 | MIPI_L1_N | |
| 13 | GND | |
| 14 | MIPI_L0_P | |
| 15 | MIPI_L0_N | |
| 16 | GND | |
| 17 | IO_EXT0 | Connected (in-board) to J3 pin 3 |
| 18 | IO_EXT1 | Connected (in-board) to J3 pin 1 |
| 19 | GND | |
| 20 | SCL | 3.3V LEVEL |
| 21 | SDA | 3.3V LEVEL |
| 22 | GND | |
| 23 | IO_EXT2 | Connected (in-board) to J2 pin 3 |
| 24 | IO_EXT3 | Connected (in-board) to J2 pin 1 |
| 25 | VCC3V3 | |
| 26 | VCC3V3 | |
| 27 | VCC3V3 | |
| 28 | GND |
| 1 | IO_EXT3 | Connected (in-board) to J1 pin 24 |
| 2 | GND | |
| 3 | IO_EXT2 | Connected (in-board) to J1 pin 23 |
*Connected J7 of the CS-MIPI-IMX307 camera module
| 1 | IO_EXT1 | Connected (in-board) to J1 pin 18 |
| 2 | GND | |
| 3 | IO_EXT0 | Connected (in-board) to J1 pin 17 |
| 1 | GND | |
| 2 | MIPI_L0_N | |
| 3 | MIPI_L0_P | |
| 4 | GND | |
| 5 | MIPI_L1_N | |
| 6 | MIPI_L1_P | |
| 7 | GND | |
| 8 | MIPI_CK_N | |
| 9 | MIPI_CK_P | |
| 10 | GND | |
| 11 | RESERVE | Not Connected |
| 12 | RESERVE | Not Connected |
| 13 | SCL | 3.3V LEVEL |
| 14 | SDA | 3.3V LEVEL |
| 15 | VCC3V3 |
*Connected J8 of the CS-MIPI-IMX307
4 Adapter Board Dimension
