Difference between revisions of "ADP-U1 Adapter Board Data Sheet"
Jump to navigation
Jump to search
| Line 37: | Line 37: | ||
|2 | |2 | ||
|RESERVE | |RESERVE | ||
| − | | | + | |NC |
|- | |- | ||
|3 | |3 | ||
|RESERVE | |RESERVE | ||
| − | | | + | |NC |
|- | |- | ||
|4 | |4 | ||
| Line 49: | Line 49: | ||
|5 | |5 | ||
|RESERVE | |RESERVE | ||
| − | | | + | |NC |
|- | |- | ||
|6 | |6 | ||
|RESERVE | |RESERVE | ||
| − | | | + | |NC |
|- | |- | ||
|7 | |7 | ||
| Line 129: | Line 129: | ||
|25 | |25 | ||
|VCC3V3 | |VCC3V3 | ||
| − | | | + | |PWR IN |
|- | |- | ||
|26 | |26 | ||
|VCC3V3 | |VCC3V3 | ||
| − | | | + | |PWR IN |
|- | |- | ||
|27 | |27 | ||
|VCC3V3 | |VCC3V3 | ||
| − | | | + | |PWR IN |
|- | |- | ||
|28 | |28 | ||
| Line 230: | Line 230: | ||
|11 | |11 | ||
|RESERVE | |RESERVE | ||
| − | | | + | |NC |
|- | |- | ||
|12 | |12 | ||
|RESERVE | |RESERVE | ||
| − | | | + | |NC |
|- | |- | ||
|13 | |13 | ||
|SCL | |SCL | ||
| − | |3.3V | + | |3.3V Level |
|- | |- | ||
|14 | |14 | ||
|SDA | |SDA | ||
| − | |3.3V | + | |3.3V Level |
|- | |- | ||
|15 | |15 | ||
|VCC3V3 | |VCC3V3 | ||
| − | |PWR | + | |PWR OUT |
|}<br /> | |}<br /> | ||
Revision as of 11:46, 16 April 2020
Adapter Board:ADP-U1 Data Sheet
1 Introduction
The function of ADP-U1 is to convert the FPC15 interface of the CS-MIPI-IMX307 camera module to the FPC28 interface of ADP-N1(a camera interposer module for AGX Xavier/TX2 DevKit).
2 Product Picture
| PART NUMBER / 型号 | FRONT VIEW / 正面图片 | BACK VIEW / 背面图片 | FFC CABLE/FFC线缆 | SKETCH MAP/示意图 |
| ADP-U1 |
3 Adapter Board Pinlist
| J1 : Connected to ADP-N1 | ||
| Pin NO. | NAME | Remarks |
| 1 | GND | |
| 2 | RESERVE | NC |
| 3 | RESERVE | NC |
| 4 | GND | |
| 5 | RESERVE | NC |
| 6 | RESERVE | NC |
| 7 | GND | |
| 8 | MIPI_CK_P | |
| 9 | MIPI_CK_N | |
| 10 | GND | |
| 11 | MIPI_L1_P | |
| 12 | MIPI_L1_N | |
| 13 | GND | |
| 14 | MIPI_L0_P | |
| 15 | MIPI_L0_N | |
| 16 | GND | |
| 17 | IO_EXT0 | Interconnect with J3-3 (IO_EXT0) |
| 18 | IO_EXT1 | Interconnect with J3-1 (IO_EXT1) |
| 19 | GND | |
| 20 | SCL | 3.3V LEVEL |
| 21 | SDA | 3.3V LEVEL |
| 22 | GND | |
| 23 | IO_EXT2 | Interconnect with J2-3 (IO_EXT2) |
| 24 | IO_EXT3 | Interconnect with J2-1 (IO_EXT3) |
| 25 | VCC3V3 | PWR IN |
| 26 | VCC3V3 | PWR IN |
| 27 | VCC3V3 | PWR IN |
| 28 | GND | |
| J2 : Connected to CS-MIPI-IMX307's J7 | ||
| Pin NO. | NAME | Remarks |
| 1 | IO_EXT3 | Interconnect with J1-24 |
| 2 | GND | |
| 3 | IO_EXT2 | Interconnect with J1-23 |
| J3 | ||
| Pin NO. | NAME | Remarks |
| 1 | IO_EXT1 | Interconnect with J1-18 |
| 2 | GND | |
| 3 | IO_EXT0 | Interconnect with J1-17 |
| J4 : Connected to CS-MIPI-IMX307's J8 | ||
| Pin NO. | NAME | Remarks |
| 1 | GND | |
| 2 | MIPI_L0_N | |
| 3 | MIPI_L0_P | |
| 4 | GND | |
| 5 | MIPI_L1_N | |
| 6 | MIPI_L1_P | |
| 7 | GND | |
| 8 | MIPI_CK_N | |
| 9 | MIPI_CK_P | |
| 10 | GND | |
| 11 | RESERVE | NC |
| 12 | RESERVE | NC |
| 13 | SCL | 3.3V Level |
| 14 | SDA | 3.3V Level |
| 15 | VCC3V3 | PWR OUT |
4 Adapter Board Dimension
