ADP-U1 Adapter Board Data Sheet
Adapter Board:ADP-U1 Data Sheet
1 Introduction
The function of ADP-KH is to convert the board-to-board connector interface of the VEYE-MIPI-290/327 main board into an FPC interface，which can be
connected to the khadas edge(-V) series single board computer camera interface through FFC cable.
| PART NUMBER / 型号 | FRONT VIEW / 正面图片 | BACK VIEW / 背面图片 | FFC CABLE/FFC线缆 | SKETCH MAP/示意图 |
| ADK-KH |
2 Adapter Board Pinlist
| 1 | GND |
| 2 | RESERVE, Not Connected |
| 3 | RESERVE, Not Connected |
| 4 | GND |
| 5 | RESERVE, Not Connected |
| 6 | RESERVE, Not Connected |
| 7 | GND |
| 8 | MIPI_CK_P |
| 9 | MIPI_CK_N |
| 10 | GND |
| 11 | MIPI_L1_P |
| 12 | MIPI_L1_N |
| 13 | GND |
| 14 | MIPI_L0_P |
| 15 | MIPI_L0_N |
| 16 | GND |
| 17 | Connected J3-3 |
| 18 | Connected J3-1 |
| 19 | GND |
| 20 | SCL(3.3V LEVEL) |
| 21 | SDA(3.3V LEVEL) |
| 22 | GND |
| 23 | Connected J2-3 |
| 24 | Connected J2-1 |
| 25 | VCC3V3 |
| 26 | VCC3V3 |
| 27 | VCC3V3 |
| 28 | GND |
3 Adapter Board Dimension
