Mv series camera appnotes 4 jetson
1 Overview
The MV series cameras are cameras introduced for AI applications in the industrial field. It uses the MIPI CSI-2 interface, which is especially suitable for embedded computing platforms.
It features rich data formats and trigger characteristics, extremely low latency, extremely high bandwidth and reliable stability.
This article describes how to use the MV series camera on the NVIDIA Jetson platform.
1.1 Camera Module List
| Series | Model | Status |
|---|---|---|
| MV series | MV-MIPI-IMX178M | Done |
1.2 Jetson Board List
| Jetson Board | Status |
|---|---|
| Nano A02 | Done |
| Nano B01 | Done |
| Nano 2GB | Done |
| TX2 NX | Done |
| XAVIER NX | Done |
| TX2 Devkit | Coming soon |
| AGX Xavier | Coming soon |
| Orin Series | Coming soon |
1.3 Supported L4T versions
- Jetpack4.6.1,L4T r32.7.1
1.3.1 How to check the current L4T version
On Jetson board
cat /etc/nv_tegra_release
If it shows:
# R32 (release), REVISION: 7.1......
It means L4t Version is 32.7.1, and the Jetpack version is 4.6.1.
2 Hardware Setup
MV series cameras require an adapter board to access the Jetson platform. The following table shows the support status.
| Jetson Board | adapter board | camera number | Power |
|---|---|---|---|
| Nano A02 | ADP-MV1 | 1 | 5V DC（Required） |
| Nano B01 | ADP-MV1 | 1 | 5V DC（Required） |
| Nano 2GB | ADP-MV1 | 2 | 5V DC（Required） |
| TX2 NX | ADP-MV1 | 2 | 5V DC（Required） |
| XAVIER NX | ADP-MV1 | 2 | 5V DC（Required） |
| TX2 Devkit | ADP-N4 | 6 | 12V DC (Optional) |
| AGX Xavier | ADP-N4 | 6 | 12V DC (Optional) |
| Orin series | TODO | TODO | TODO |
2.1 Connection of MV-MIPI-IMX178M and ADP-MV1
The two are connected using 0.5 mm pitch*30P FFC cable with opposite direction. The cable must be inserted with the silver contacts facing outside.
2.2 Connection using ADP-MV1 (using Xavier NX as an example)
2.2.1 Power supply
The ADP-MV1 requires a separate 5V power supply and can be powered directly from the Jetson board using a Dupont cable.
2.3 Connection using ADP-MV1
The Nano Series and NX Series are connected in this way.
2.4 Connection using ADP-N4
The AGX Series and TX2 Devkit are connected in this way.
TODO
3 Upgrade Jetson system
This section describes how to upgrade the Jetson system to support MV camera module. For OS update method, please refer to Update Jetson OS.
Specially, for MV series camera, besides adding the camera driver in linux system, we also add a kernel patch - veye_mv_l4t_32.7.1.patch.
This patch has two features：
- Added support for both Y10 and Y12 data formats for Mono cameras.
- Added support for trigger mode.
3.1 Description of raw data image format
On TX2 and XAVIER, 10 bit depth and 12 bit depth raw data is stored in memory in a format that is not compliant with the V4L2 standard. We have extended the definition in the linux kernel to support this case.
TY10, TY12, XY10 and XY12 are the new types we have added.
3.1.1 Nano
| Depth | Bit order | FourCC | Enumerator |
|---|---|---|---|
| 8 | B7 B6 B5 B4 B3 B2 B1 B0 | GREY | V4L2_PIX_FMT_GREY |
| 10 | 0 0 0 0 0 0 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0 | 'Y10 ' | V4L2_PIX_FMT_Y10 |
| 12 | 0 0 0 0 B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0 | 'Y12 ' | V4L2_PIX_FMT_Y12 |
3.1.2 TX2
| Depth | Bit order (X is undefined) | FourCC | Enumerator |
|---|---|---|---|
| 8 | B7 B6 B5 B4 B3 B2 B1 B0 | GREY | V4L2_PIX_FMT_GREY |
| 10 | 0 0 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0 X X X X | TY10 | V4L2_PIX_FMT_TX2_Y10 |
| 12 | 0 0 B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0 X X | TY12 | V4L2_PIX_FMT_TX2_Y12 |
3.1.3 XAVIER
| Depth | Bit order (X is undefined) | FourCC | Enumerator |
|---|---|---|---|
| 8 | B7 B6 B5 B4 B3 B2 B1 B0 | GREY | V4L2_PIX_FMT_GREY |
| 10 | 0 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0 X X X X X | XY10 | V4L2_PIX_FMT_XAVIER_Y10 |
| 12 | 0 B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0 X X X | XY12 | V4L2_PIX_FMT_XAVIER_Y12 |
Also, we provide tool software in order to convert these special data formats to standard formats: https://github.com/veyeimaging/pixel_layer_convert.
3.1.4 Support for trigger mode
The default driver for Jetson systems only supports video streaming mode. In its VI driver, the data reception function has a timeout mechanism. We have added a settable vi_time_out_disable option to dynamically turn this timeout mechanism on and off.
Refer to the following application example for specific applications.