RAW-MIPI-AR0234M Data Sheet
Jump to navigation
Jump to search
RAW-MIPI-SC132M Data Sheet
1 Introduction
RAW-MIPI-SC132M is a 1.3 million MONO industrial camera with MIPI interface.
This camera has a small size (29*29mm) and rich functions, so it is suitable for integration as an image acquisition component.
2 Features
- 1/4'' 1.3M Pixel SmartGS® SC132GS CMOS Sensor
- MIPI CSI-2 Interface
- Mono-8、Mono-10 Data Format
- Video streaming mode，Trigger mode
- Hardware and Software trigger source
- Support trigger delay, trigger count function
- Strobe synchronization
- ROI
- Flexible frame rate settings
- Support Sensor Direct Access mode
3 Technical Detail
| Technical Details | |
| Sensor Type | CMOS |
| Shutter Mode | Global Shutter |
| Sensor | SmartGS® SC132GS |
| Color | MONO |
| Image Size | 1/4'' |
| Unit Cell Size | 2.7μm × 2.7μm |
| Resolution | 1080（H） × 1280（V） |
| Max Frame Rate | 1080 × 1280@120fps |
| Gain | 0-40dB，0.1dB step |
| Exposure Time | ≤ 1/（max frame rate） |
| Shutter Mode | Manual Exposure，Manual Gain |
| ADC Resolution | 10 bit |
| Pixel Format | Mono8，Mono10 |
| ROI | Support |
| Mirror Image | Mirror and Flip |
| Working Mode | Hardware Trigger，Software Trigger，Video streaming mode |
| Trigger Mode | Trigger Delay，Trigger Polarity Control |
| Strobe Mode | Strobe Output |
| Electrical characteristics | |
| Data Interface | CSI-2 : 2 Data Lanes
Data Rate / lane：1.188Gbps |
| Communication Interface | I2C 3.3V |
| Digital IO | Non-isolation IO：1 Trigger in，2 Strobe output，3.3V Level |
| Power Supply | 3.3V DC |
| Power Consumption | TBD |
| Structure | |
| Size | Length * width * height = 29*29*7.5mm |
| Lens Mount | C-MOUNT01 or M12 holder |
| Operating Conditions | |
| Temperature | Operating temperature：-30℃~ 60℃ |
| Humidity | Humidity 95% or less |
4 Spectral Sensitivity Characteristics
| Sensor | Spectral Sensitivity |
| SC132GS-M |
5 Interface & Pin list
| J1 : CSI-2 Interface | ||
| Pin NO. | NAME | Remarks |
| 1 | GND | |
| 2 | MIPI_L0_N | |
| 3 | MIPI_L0_P | |
| 4 | GND | |
| 5 | MIPI_L1_N | |
| 6 | MIPI_L1_P | |
| 7 | GND | |
| 8 | MIPI_CK_N | |
| 9 | MIPI_CK_P | |
| 10 | GND | |
| 11 | ENABLE | Camera Power Enable |
| 12 | NC | |
| 13 | SCL | 3.3V Level |
| 14 | SDA | 3.3V Level |
| 15 | VCC3V3 | |
| J2 : GPIO | ||
| Pin NO. | NAME | Remarks |
| 1 | Trigger In | 3.3V level |
| 2 | GND | |
| 3 | Strobe Out | 3.3V level |
