C-MOUNT03

From wiki_veye
Revision as of 08:45, 12 August 2024 by Ezcam (talk | contribs)
Jump to navigation Jump to search

1 Product Picture 产品图片

Product Picture 产品图片 Product Picture 产品图片 Camera Support 支持的相机
C-MOUNT03
C-MOUNT03
MV-MIPI-IMX178M

MV-MIPI-SC130M

MV-MIPI-IMX296M

MV-MIPI-IMX265M

MV-MIPI-IMX264M

RAW-MIPI-IMX462M

2 Attention 注意事项

2.1 Overview 概述

C-MOUNT03针对C-MOUNT01后截距进行了优化。

C-MOUNT03仅仅是一个C-MOUNT镜头固定座,为了适配MV系列和RAW系列摄像机,实际后焦法兰焦距略小于17.526mm,配合不同型号的摄像机模组,需要将镜头向远离传感器的方向调整。具体数值需要根据传感器的成像面高度决定。

C-MOUNT03 is optimized for the post-intercept of C-MOUNT01.

C-MOUNT03 is only a C-MOUNT lens mount. In order to fit the MV series and RAW series camera, the actual Flange BFL distance is less than 17.526mm. With different camera modules,

the lens needs to be adjusted away from the sensor. The specific value needs to be determined according to the sensor's imaging surface height.

Not adjusted / 未调整 Adjusted / 向外调整
C MOUNT-LENS 02.jpg
C MOUNT-LENS 01.jpg

2.2 镜头向远离传感器方向偏移距离 “Da” 的计算:Calculation of lens offset distance “Da” away from the sensor

Da = Dc - ( H - Ds )

法兰后焦距 / Flange BFL :Dc = 17.526mm

C-MOUNT02高度 / The Height of C-MOUNT01:H= 18mm

传感器底面到感光面的距离 / Distance from the bottom of the sensor to the effective image area:Ds

Parameter 参数表
Part NO. / 型号 Ds (mm) Da(mm)
MV-MIPI-IMX296M 0.92 0.446
MV-MIPI-IMX178M 0.92 0.446

MV-MIPI-IMX265M

0.92 0.446

MV-MIPI-IMX264M

0.92 0.446

MV-MIPI-IMX287M

0.92 0.446

RAW-MIPI-IMX462M

0.62 0.146
MV-MIPI-SC130M 0.6 0.126

3 Dimension 尺寸图


4 2D 文件

Download 2D file here

5 3D 文件

Download 3D file here