USB firmware update app note

From wiki_veye
Revision as of 15:16, 1 December 2019 by Xumm (talk | contribs) (Created page with "This AN introduces how to upgrade the firmware of camera module by using U disk through USB interface. === Applicable Product modles === *CS-MIPI-IMX307 *CS-LVDS-IMX307 *CS...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This AN introduces how to upgrade the firmware of camera module by using U disk through USB interface.

1 Applicable Product modles

  • CS-MIPI-IMX307
  • CS-LVDS-IMX307
  • CS-USB-IMX307
  • CS-MIPI-SC132
  • CS-LVDS-SC132
  • CS-USB-SC132

2 How to upgrade camera firmware using USB disk

2.1 Prepare

  • Get the upgrade file via link,or other way. The default file name is ProductMode_Version_Releasedata.bin.
  • Formatting your Usb Disk to FAT32.
  • Rename upgrade file name to dimaging_upgrade.bin and copy to root dir of USB disk.

Upgrading

  • Plug in the USB disk as shown belown when power off.
CS-USB-IMX307
CS-MIPI-IMX307
  • Power on. Notice that USB camera modules using power port instead of commonly used USB port.
  • The camera module will check the upgrade file. If LED light ON for 500ms and OFF, means upgrading begin. If LED ON for > 2s, means upgrade file wrong.
  • LED ON and OFF for 3 times， means upgrading OK. Power off.
  • If LED stays ON， this means upgrading failed，please check the upgrade file.
Retrieved from "http://wiki.veye.cc/index.php?title=USB_firmware_update_app_note&oldid=918"