CS-MIPI-IMX307 version log
1 How to get version
CS-MIPI-IMX307 has two version number, Using shell scriptCS-MIPI-X i2c，get hdver and firmwarever.
hdver is logic version of FPGA，firmwarever is firmware version.
2 Upgrade package download
CS Serials Camera Upgrade Images（CS系列模组升级镜像baiduyun）
or
CS Serials Camera Upgrade Images（Mediafire）
3 Version Log
CS-MIPI-IMX307_FV1.23_LV2.3_20200507.bin
1. Modify the definition of imagedir.
2. support indirect reading of sensor register.
- CS-MIPI-IMX307_FV1.22_LV2.3_20200506.bin
1. Two special daynight modes have been added.
- CS-MIPI-IMX307_FV1.21_LV2.3_20200422.bin
1.support flip mirror setting.
2. support ae param setting.
- CS-MIPI-IMX307_FV1.19_LV2.3_20200417.bin
1. Optimized sync mode，achieve the consistency of the output phase of the master and slave cameras mipi signal.
- CS-MIPI-IMX307_FV1.18_LV2.2_20200413.bin
1. fix bug: Possible duplicate frame problem.
2. Modified sync mode to reduce latency.
- CS-MIPI-IMX307_FV1.17_LV2.2_20200410.bin
1. support CSC param: hue,contrast,saturation.
2. support day/night mode setting via i2c cmd.
3. support exposure state and white balance state read out.
4. support manual exposure and manual white balance setting.
- CS-MIPI-IMX307_V1.16_V2.2_20200403.bin
1. support 640*480@130fps mode
2. Reduce the delay.
3. fix bug：No matter what the configuration parameters are, it always starts in 1920*1080 mode.
- CS-MIPI-IMX307_V1.15_V2.2_20200327.bin
1. support stream sync mode.
2. support i2c address change and save.
- CS-MIPI-IMX307_V1.0_20191208.bin
1. support antiflicker.
2. Reduce 3D denoise strength.