RAW-MIPI-SC132M Data Sheet

From wiki_veye
Revision as of 10:31, 26 October 2022 by Admin (talk | contribs)
Jump to navigation Jump to search

查看中文

RAW-MIPI-SC132M Data Sheet

1 Introduction

RAW-MIPI-SC132M is a 1.3 million MONO industrial camera with MIPI interface.

This camera has a small size (29*29mm) and rich functions, so it is suitable for integration as an image acquisition component.

MV-MIPI-SC130M

2 Features

  • 1/2.4'' 1.3M Pixel SmartGS® SC132GS CMOS Sensor
  • MIPI CSI-2 Interface
  • Mono-8、Mono-10 Data Format
  • Video streaming mode,Trigger mode
  • Hardware and Software trigger source
  • Support trigger delay, trigger count function
  • Strobe synchronization
  • ROI
  • Flexible frame rate settings
  • Support Sensor Direct Access mode
MV-MIPI-SC130M

3 Technical Detail

Technical Details
Sensor Type CMOS
Shutter Mode Global Shutter
Sensor SmartGS® SC132GS
Color MONO
Image Size 1/4''
Unit Cell Size 2.7μm × 2.7μm
Resolution 1080(H) × 1280(V)
Max Frame Rate 1080 × 1280@120fps
Gain 0-40dB,0.1dB step
Exposure Time ≤ 1/(max frame rate)
Shutter Mode Manual Exposure,Manual Gain
ADC Resolution 10 bit
Pixel Format Mono8,Mono10
ROI Support
Mirror Image Mirror and Flip
Working Mode Hardware Trigger,Software Trigger,Video streaming mode
Trigger Mode Trigger Delay,Trigger Polarity Control
Strobe Mode Strobe Output
Electrical characteristics
Data Interface CSI-2 : 2 Data Lanes

Data Rate / lane:1.188Gbps

Communication Interface I2C 3.3V
Digital IO Non-isolation IO:1 Trigger in,2 Strobe output,3.3V Level
Power Supply 3.3V DC
Power Consumption 1.0W@ 5V DC
Structure
Size Length * width * height = 29*29*11mm
Lens Mount C-MOUNT01 or M12 holder
Operating Conditions
Temperature Operating temperature:-30℃~ 60℃
Humidity Humidity 95% or less

4 Spectral Sensitivity Characteristics

Sensor Spectral Sensitivity
SC130GS-M
SC132GS QE

5 Interface & Pin list

MV-MIPI-SC130M
MV-MIPI-SC130M
J8 : CSI-2 Interface
Pin NO. NAME Remarks
1 GND
2 MIPI_L0_N
3 MIPI_L0_P
4 GND
5 MIPI_L1_N
6 MIPI_L1_P
7 GND
8 MIPI_CK_N
9 MIPI_CK_P
10 GND
11 NC
12 NC
13 SCL 3.3V Level
14 SDA 3.3V Level
15 VCC3V3
J7 : GPIO
Pin NO. NAME Remarks
1 Trigger In Compatible with 2.5-3.3V level
2 GND
3 Strobe Out 3.3V level

6 Board Dimension

PCBA-RAW-SC130GS-M-2D-jpeg.jpg

Download dwg file here

7 PCBA 3D STP File

Download 3D STP file