RAW-MIPI-IMX462M Data Sheet
1 Introduction
RAW-MIPI-IMX462M is a 2 Mega MONO industrial camera with MIPI interface.
This camera has a small size (29*29mm) and rich functions, so it is suitable for integration as an image acquisition component.
2 Features
- 1/2.8" 2M Pixel SONY STARVIS CMOS sensor
- MIPI CSI-2 Interface
- Mono-10/Mono-12 Data Format
- 2lane/4lane mode
- Video streaming mode
- Master mode and Slave mode
- ROI
- Flexible frame rate settings
- Support Sensor Direct Access mode
3 Technical Detail
| Technical Details | |
| Sensor Type | CMOS |
| Shutter Mode | Rolling Shutter |
| Sensor | SONY IMX462LLR-C STARVIS |
| Color | MONO |
| Image Size | 1/2.8'' |
| Unit Cell Size | 2.9μm × 2.9μm |
| Resolution | 1944（H） × 1096（V） |
| Max Frame Rate | 4lane mode@10bit：1944 x 1096 @120fps
2lane mode@10/12bit：1944 x 1096 @600fps |
| Gain | 0 dB to 29.4 dB: Analog Gain 29.4 dB (step pitch 0.3 dB)
29.7 dB to 71.4 dB: Analog Gain 29.4 dB + Digital Gain 0.3 to 42 dB (step pitch 0.3 dB) |
| Exposure Time | ≤ 1/（max frame rate） |
| Shutter Mode | Manual Exposure，Manual Gain |
| ADC Resolution | 10-bit / 12-bit A/D converter |
| Pixel Format | Mono10，Mono12 |
| ROI | Support |
| Mirror Image | Mirror and Flip |
| Working Mode | Video streaming mode |
| Sync Mode | Master mode, Slave mode |
| Strobe Mode | Strobe Output |
| Electrical characteristics | |
| Data Interface | MIPI CSI-2
Data Rate / lane：891Mbps lane num：2 lane / 4 lane |
| Communication Interface | I2C 3.3V |
| Digital IO | Non-isolation IO：XVS XHS，3.3V Level |
| Power Supply | 3.3V DC |
| Power Consumption | TBD |
| Structure | |
| Size | Length * width * height = 29*29*7.5mm |
| Lens Mount | C-MOUNT01 or M12 holder |
| Operating Conditions | |
| Temperature | Operating temperature：-30℃~ 60℃ |
| Humidity | Humidity 95% or less |
4 Spectral Sensitivity Characteristics
| Sensor | Spectral Sensitivity |
| IMX462LLR-C |
5 Interface & Pin list
| J3 : Camera MIPI CSI-2 | ||
| Pin NO. | NAME | Remarks |
| 1 | VCC3V3 | 3.3V PWR IN |
| 2 | SDA | 3.3V Level |
| 3 | SCL | 3.3V Level |
| 4 | GND | |
| 5 | NC | |
| 6 | SYS_RSTn | System reset,Active Low |
| 7 | GND | |
| 8 | MIPI_L3_P | |
| 9 | MIPI_L3_N | |
| 10 | GND | |
| 11 | MIPI_L2_P | |
| 12 | MIPI_L2_N | |
| 13 | GND | |
| 14 | MIPI_CK_P | |
| 15 | MIPI_CK_N | |
| 16 | GND | |
| 17 | MIPI_L1_P | |
| 18 | MIPI_L1_N | |
| 19 | GND | |
| 20 | MIPI_L0_P | |
| 21 | MIPI_L0_N | |
| 22 | GND | |
| J2：GPIO | ||
| Pin NO. | NAME | Remarks |
| 1 | XVS | IN / OUT，3.3V |
| 2 | GND | |
| 3 | XHS | IN / OUT，3.3V |
6 Board Dimension
Download 2D DXF file
7 PCBA 3D STP File
Download 3D STP file