CS-MIPI-X i2c

查看中文

cs_mipi_i2c.sh Shell scripts usage

1 Introduction

The cs_mipi_i2c.sh script is a toolset for configuring CS-MIPI-X series cameras through the I2C.

2 RaspberryPi Only, Set IO config

Include the following files，camera_i2c_config、i2c_read、i2c_write、cs_mipi_i2c.sh.

Running

./enable_i2c_vc.sh

./camera_i2c_config

first，it will config IO pin. Then you can run cs_mipi_i2c.sh.

2.1 camera_i2c_config USAGE

• for standard RPI, just run

./camera_i2c_config

• for RPI Computer Module

./camera_i2c_config [cameranum]

cameranum	description
0	CAM0
1	CAM1

3 cs_mipi_i2c.sh USAGE

./cs_mipi_i2c.sh

this shell scripts should be used for CS-MIPI-IMX307!

Usage:  ./cs_mipi_i2c.sh [-r/w] [-f] function name -p1 param1 -p2 param2 -p3 param3 -b bus

options:

    -r                       read

    -w                       write

    -f [function name]       function name

    -p1 [param1]                           param1 of each function

    -p2 [param1]                           param2 of each function

    -p3 [param1]                           param3 of each function

    -b [i2c bus num]               i2c bus number

    -d [i2c addr]                  i2c addr if not default 0x3b

support functions: devid,firmwarever,productmodel,videofmtcap,videofmt,ispcap,i2caddr,powerhz,sysreset,paramsave

Pi3B / Pi3B+ / 3A / 4B(1G/2G/4G)，we use i2c0

Compute Module/ CM3，we use i2c1,please add -b 1 option.

3.1 devid

./cs_mipi_i2c.sh -r -f devid

value	description
0x210	CS-MIPI-IMX307

3.2 firmwarever

./cs_mipi_i2c.sh -r -f firmwarever

get firmware version, X.Y, 1.0 for example.

3.3 productmodel

./cs_mipi_i2c.sh -r -f productmodel

get product model，for example：CS-MIPI-IMX307

3.4 videofmtcap

./cs_mipi_i2c.sh -r -f videofmtcap

get camera video format capbility, for example:

1920*1080 30fps

1280*720 60fps

3.5 videofmt

./cs_mipi_i2c.sh -r -f videofmt

./cs_mipi_i2c.sh -w -f videofmt -p1 1920 -p2 1080 -p3 30

./cs_mipi_i2c.sh -w -f videofmt -p1 1280 -p2 720 -p3 60

get and set current video format，for example:

1920*1080 30fps

1280*720 60fps

3.6 ispcap

./cs_mipi_i2c.sh -r -f ispcap

get camera isp capbility. Will add details later.

3.7 powerhz

./cs_mipi_i2c.sh -r -f powerhz

./cs_mipi_i2c.sh -w -f powerhz -p1 50

./cs_mipi_i2c.sh -w -f powerhz -p1 60

value	description
50	Power frequency is 50Hz
60	Power frequency is 60Hz

Configure the power frequency of the environment in which the camera is used.

• 50Hz framerate is 25、50、100；60Hz framerate is 30、60、120.
• camera support antiflicker, accroding to powerhz setting here.

3.8 i2caddr

./cs_mipi_i2c.sh -r -f i2caddr -d i2caddrnow

./cs_mipi_i2c.sh -w -f i2caddr -p1 newi2caddr -d oldi2caddr

This module support i2c addr change by software, i2c addr range[0x3,0x77].

Note: only supported on firmware version >= 1.05

3.9 paramsave

./cs_mipi_i2c.sh -w -f paramsave

Write the configured parameters to flash. So parameters will not be lost when poweroff.

3.10 sysreset

./cs_mipi_i2c.sh -w -f sysreset

The camera reset to the factory default parameters.