Line 315: |
Line 315: |
| <small><code> Size: Discrete 3088x2064</code></small> | | <small><code> Size: Discrete 3088x2064</code></small> |
| | | |
− | <br /> | + | <br />On Raspberry Pi 5, the actual supported image formats depend on the capabilities of the camera, not the list provided here. |
| | | |
| ====== List the configurable parameters of the camera implemented in the driver ====== | | ====== List the configurable parameters of the camera implemented in the driver ====== |
Line 339: |
Line 339: |
| | | |
| <code>v4l2-ctl --get-ctrl [ctrl_type]</code> | | <code>v4l2-ctl --get-ctrl [ctrl_type]</code> |
| + | |
| + | |
| + | Note: For Raspberry Pi 5, the -d parameter needs to be added to all commands in this section to specify the subdev used for configuring parameters. |
| + | |
| + | For example, if executing ./media_setting_rpi5.sh or ./find_entity.sh prompts the use of /dev/v4l-subdev2 for parameter configuration, then <code>v4l2-ctl -L</code> should be changed to <code>v4l2-ctl -L -d /dev/v4l-subdev2</code>. |
| | | |
| All the above functions can be implemented using [[Mv mipi i2c.sh user guide|mv_mipi_i2c.sh]]. | | All the above functions can be implemented using [[Mv mipi i2c.sh user guide|mv_mipi_i2c.sh]]. |
Line 395: |
Line 400: |
| In streaming mode, the following commands can be used for frame rate statistics. | | In streaming mode, the following commands can be used for frame rate statistics. |
| | | |
− | <code>v4l2-ctl --set-fmt-video=width=$WIDTH,height=$HEIGHT,pixelformat=GREY --stream-mmap --stream-count=-1 --stream-to=/dev/null</code> | + | <code>v4l2-ctl -d /dev/video0 --set-fmt-video=width=$WIDTH,height=$HEIGHT,pixelformat=GREY --stream-mmap --stream-count=-1 --stream-to=/dev/null</code> |
| | | |
| ===== Save image to file ===== | | ===== Save image to file ===== |