Line 2: |
Line 2: |
| | | |
| === Overview === | | === Overview === |
− | 关键词,i2c,i2c addr, i2c speed, shell脚本,register 地址位位宽,数据位宽,字节序。
| |
| | | |
− | 关于采集状态和standby状态描述。
| + | ==== Register Features ==== |
| + | The register address length is 4 bytes and the data length is 2 bytes. |
| | | |
− | 参考sensor手册的英文描述。
| + | Register R/W attributes: '''RW''', '''RO''', '''WO'''. Only the RW type can be saved to the camera flash. |
− | <br /> | + | |
| + | Register values have several types: '''int''', '''bool''', '''enum''', '''ascii'''. |
| + | |
| + | The camera has two states, '''standby''' and '''running''', after the start of image acquisition into the '''running''' state. |
| + | |
| + | Some registers do not support modification in the running state, in the table's '''''update timing''''' column, marked "S" indicates such registers. |
| + | |
| + | ==== I2c communication protocol ==== |
| + | The module supports parameter configuration via i2c protocol. The default i2c slave address of the camera is 0x3b which can be modified.<br />I2c data input order is MSB-first transfer. |
| + | |
| + | We provide open source shell scripts under Linux to help read and write each register. |
| | | |
| === Basic Parameters === | | === Basic Parameters === |