Line 75: |
Line 75: |
| | | |
| === 系统状态检测 === | | === 系统状态检测 === |
| + | 完成系统安装后,在Firefly板端执行以下命令来检测是否正确连接摄像头。 |
| + | |
| + | * VEYE-MIPI-XXX |
| + | |
| + | <code>dmesg | grep veye</code> |
| + | |
| + | 应当有类似如下提示: |
| + | |
| + | <code>camera id is veyecam2m</code> |
| + | |
| + | <code>sensor is IMX327/IMX462/IMX385</code> |
| + | |
| + | * 执行如下命令检查video0设备节点 |
| + | |
| + | <code>ls /dev/video0</code> |
| + | |
| + | 可以看到 |
| + | |
| + | <code>video0</code> |
| + | |
| + | 正确识别摄像头之后,MIPI-CSI2接口的摄像头挂载到i2c-4,识别为/dev/video0。 |
| | | |
| === 应用范例 === | | === 应用范例 === |