CS-MIPI-IMX307 STARVIS Module

From wiki_veye
Revision as of 14:50, 22 November 2019 by Ezcam (talk | contribs) (Created page with "查看中文 ===Introduction=== CS-MIPI-IMX307 is a high quality Sony STARVIS IMX307 image sensor custom designed add-on board for Raspbe...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

查看中文

1 Introduction

CS-MIPI-IMX307 is a high quality Sony STARVIS IMX307 image sensor custom designed add-on board for Raspberry PI.

It attaches to Pi by way of one of the small sockets on the board upper surface and uses the dedicated CSI interface, designed especially for interfacing to cameras.

CS-MIPI-IMX307 TOP


CS-MIPI-IMX307 BOT

2 Features

  • 1/2.8 inch 2 Mega STARVIS sensor IMX307 by SONY
  • CSI-2 Interface
  • Uncompressed UYVY format, YUV422-8bit
  • Standard lens mount
  • IR-CUT circuit
  • BLC, DWDR, 2D/3D noise reduction, Anti-fog
  • Brightness, Contrast, Sharpness, Saturation adjustable
  • Support Raspberry PI, FPGA, ZYNQ, RK3288, RK3399, JETSON NANO,TX2


3 Thechnical Detail

Technical Details
SENSOR
Sensor SONY IMX307-C STARVIS
Pixels 2.07M pixels
Resolution 1920*1080
Image Size Diagonal 6.46 mm (Type 1/2.8)
Unit Cell Size 2.9um (H)*2.9um(V)
SNR1 Value 0.24lx
ISP
Frame Rate 1080p@25fps / 30fps, 720p@60fps / 50fps
Exposure Auto or Manual
White Balance Auto or Manual
Shutter 1/25(1/30)s to 1/50,000s
Slow Shutter Support
Denoising 2D/3D noise reduction
Image Setting Brightness, Contrast, Sharpness, Saturation,Flip, Mirror
Image Enhancement BLC, DOL-WDR, Defog
Day/Night Switch Manual or IR-CUT filter with external trigger
Lens & IR-CUT
Lens Support M12*0.5 or M16*0.5 depend on lens mount
Lens Mount with IR-CUT MTV12 or MTV16
Mounting Hole 2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing
Interface
PCB Connector BTB connector:BTB050040-F1D
Communication Interface IIC, 3.3VDC
Video Data Interface MIPI:2 Data Lanes, CSI2 YUV422-8bit Data Type, Bandwidth 1.188Gbps
IR-CUT Control IR-CUT motor control, 3.3VDC
Day/Night External Trigger 3.3VDC to 12VDC compatibility
General
Operating Conditions -10℃~50℃, Humidity 95% or less, non-condensing
Power Supply 3.3VDC
Power Consumption 3.3VDC,1.2W
Dimension 38mm*38mm*8mm(not include lens and lens mount)