Difference between revisions of "CS-USB-IMX307"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
Users can easily integrate into embedded systems or PC platforms via USB interface. | Users can easily integrate into embedded systems or PC platforms via USB interface. | ||
[[File:CS-USB-IMX307 TOP.jpg|thumb|CS-USB-IMX307 TOP]] | [[File:CS-USB-IMX307 TOP.jpg|thumb|CS-USB-IMX307 TOP]] | ||
| + | [[File:CS-USB-IMX307 BOTTOM.jpg|thumb|CS-USB-IMX307 BOTTOM]] | ||
==Features== | ==Features== | ||
| Line 12: | Line 13: | ||
*Built-in ISP processing | *Built-in ISP processing | ||
*USB2.0 Interface,USB Video Class('''UVC''') | *USB2.0 Interface,USB Video Class('''UVC''') | ||
| − | *Data fromat : YUV / MJPEG / H.264 | + | *Data fromat : '''YUV''' / '''MJPEG''' / '''H.264''' |
*Standard lens mount | *Standard lens mount | ||
*IR-CUT circuit | *IR-CUT circuit | ||
| Line 110: | Line 111: | ||
|38mm*38mm*10mm(not include lens and lens mount) | |38mm*38mm*10mm(not include lens and lens mount) | ||
|}<br /> | |}<br /> | ||
| + | ==Interface & Pin list== | ||
| + | [[File:CS-USB-IMX307 TOP PIC.jpg|thumb|CS-USB-IMX307 TOP PIC]] | ||
| + | [[File:CS-USB-IMX307 BIF.jpg|thumb|CS-USB-IMX307 BOTTOM INTERFACE]] | ||
| − | ==Interface | + | ===J1:USB2.0 Interface=== |
| − | <br /> | + | {| class="wikitable" |
| + | |1 | ||
| + | |VBUS(5V) | ||
| + | |- | ||
| + | |2 | ||
| + | |D- | ||
| + | |- | ||
| + | |3 | ||
| + | |D+ | ||
| + | |- | ||
| + | |4 | ||
| + | |GND | ||
| + | |} | ||
| + | ===J3:Power Input, Used during firmware upgrade=== | ||
| + | {| class="wikitable" | ||
| + | |1 | ||
| + | |5VDC IN | ||
| + | |- | ||
| + | |2 | ||
| + | |NC | ||
| + | |- | ||
| + | |3 | ||
| + | |NC | ||
| + | |- | ||
| + | |4 | ||
| + | |GND | ||
| + | |} | ||
| + | ===J4:Day/Night Trigger=== | ||
| + | {| class="wikitable" | ||
| + | |1 | ||
| + | |IR LED ON,Low level active | ||
| + | |- | ||
| + | |2 | ||
| + | |GND | ||
| + | |- | ||
| + | |3 | ||
| + | |RESERVE | ||
| + | |} | ||
| + | ===J6:IRCUT Control=== | ||
| + | {| class="wikitable" | ||
| + | |1 | ||
| + | |IRCUT1 | ||
| + | |- | ||
| + | |2 | ||
| + | |IRCUT2 | ||
| + | |} | ||
| + | ===J7:Trigger IN,Strobe OUT ( ''RESERVE'' )=== | ||
| + | {| class="wikitable" | ||
| + | |1 | ||
| + | |Trigger IN | ||
| + | |- | ||
| + | |2 | ||
| + | |GND | ||
| + | |- | ||
| + | |3 | ||
| + | |Strobe OUT | ||
| + | |}<br /> | ||
==Board Dimension== | ==Board Dimension== | ||
Revision as of 17:01, 24 November 2019
1 Introduction
CS-USB-IMX307 is a cost-effective USB camera. This module use the SONY STARVIS CMOS image sensor IMX307LQD-C,built-in ISP processing.
Users can easily integrate into embedded systems or PC platforms via USB interface.
2 Features
- SONY IMX307 STARVIS Sensor, 1/2.8 inch 2 Mega
- Built-in ISP processing
- USB2.0 Interface,USB Video Class(UVC)
- Data fromat : YUV / MJPEG / H.264
- Standard lens mount
- IR-CUT circuit
- BLC, Digtal WDR, 2D/3D noise reduction, Anti-fog
- Brightness, Contrast, Sharpness, Saturation adjustable
3 Thechnical Detail
| Technical Details | |
| SENSOR | |
| Sensor | SONY IMX307LQD-C STARVIS |
| Pixels | 2.07M pixels |
| Resolution | 1920*1080 |
| Image Size | Diagonal 6.46 mm (Type 1/2.8) |
| Unit Cell Size | 2.9um (H)*2.9um(V) |
| SNR1 Value | 0.24lx |
| ISP | |
| Frame Rate | 1080p@25fps / 30fps, 720p@60fps / 50fps |
| Exposure | Auto or Manual |
| White Balance | Auto or Manual |
| Shutter | 1/25(1/30)s to 1/50,000s |
| Slow Shutter | Coming Soon |
| Denoising | 2D/3D noise reduction |
| Image Setting | Brightness, Contrast, Sharpness, Saturation,Flip, Mirror |
| Image Enhancement | BLC, Digtal WDR, Defog |
| Day/Night Switch | Manual or IR-CUT filter with external trigger |
| Lens & IR-CUT | |
| Lens | Support M12*0.5 or M16*0.5 depend on lens mount |
| Lens Mount with IR-CUT | MTV12 or MTV16 |
| Mounting Hole | 2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing |
| Interface | |
| Connector | MX1.25*4,USB2.0 Interface |
| Communication Interface | USB2.0,UVC Protocol |
| IR-CUT Control | IR-CUT motor control, 3.3VDC |
| Day/Night External Trigger | 3.3VDC to 5VDC compatibility |
| General | |
| Operating Conditions | -10℃~50℃, Humidity 95% or less, non-condensing |
| Power Supply | 5VDC |
| Power Consumption | 5VDC,1.5W MAX |
| Dimension | 38mm*38mm*10mm(not include lens and lens mount) |
4 Interface & Pin list
4.1 J1:USB2.0 Interface
| 1 | VBUS(5V) |
| 2 | D- |
| 3 | D+ |
| 4 | GND |
4.2 J3:Power Input, Used during firmware upgrade
| 1 | 5VDC IN |
| 2 | NC |
| 3 | NC |
| 4 | GND |
4.3 J4:Day/Night Trigger
| 1 | IR LED ON,Low level active |
| 2 | GND |
| 3 | RESERVE |
4.4 J6:IRCUT Control
| 1 | IRCUT1 |
| 2 | IRCUT2 |
4.5 J7:Trigger IN,Strobe OUT ( RESERVE )
| 1 | Trigger IN |
| 2 | GND |
| 3 | Strobe OUT |
5 Board Dimension
6 Select a Lens for This Camera Module
The lens models listed below can be used with CS-MIPI-IMX307 module.