CS-USB-IMX307/zh

From wiki_veye
Revision as of 11:13, 1 December 2019 by Ezcam (talk | contribs)
Jump to navigation Jump to search

English

1 Introduction

CS-USB-IMX307 is a cost-effective USB camera. This module use the SONY STARVIS CMOS image sensor IMX307LQD-C,built-in ISP processing.

Users can easily integrate into embedded systems or PC platforms via USB interface.

CS-USB-IMX307 TOP
CS-USB-IMX307 BOTTOM

2 Features

  • SONY IMX307 STARVIS Sensor, 1/2.8 inch 2 Mega
  • Built-in ISP processing
  • USB2.0 Interface,USB Video Class(UVC)
  • Data fromat : YUY2 / MJPG / H.264
  • Standard lens mount
  • IR-CUT circuit
  • BLC, Digtal WDR, 2D/3D noise reduction, Anti-fog
  • Brightness, Contrast, Sharpness, Saturation adjustable

3 Thechnical Detail

Technical Details
SENSOR
Sensor SONY IMX307LQD-C STARVIS
Pixels 2.07M pixels
Resolution 1920*1080 MAX
Image Size Diagonal 6.46 mm (Type 1/2.8)
Unit Cell Size 2.9um (H)*2.9um(V)
SNR1s Value 0.24lx
ISP
YUY2 Frame Rate 640*360@25fps / 30fps
MJPG Frame Rate 1920*1080@25fps / 30fps, 1280*720@50fps / 60fps, 640*360@25fps / 30fps
H.264 Frame Rate 1920*1080@25fps / 30fps, 1280*720@50fps / 60fps, 640*360@25fps / 30fps
Exposure Auto or Manual
White Balance Auto or Manual
Shutter 1/25(1/30)s to 1/50,000s
Slow Shutter Coming Soon
Denoising 2D/3D noise reduction
Image Setting Brightness, Contrast, Sharpness, Saturation,Flip, Mirror
Image Enhancement BLC, Digtal WDR, Defog
Day/Night Switch Manual or IR-CUT filter with external trigger
Lens & IR-CUT
Lens Support M12*0.5 or M16*0.5 depend on lens mount
Lens Mount with IR-CUT MTV12 or MTV16
Mounting Hole 2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing
Interface
Connector MX1.25*4,USB2.0 Interface
Communication Interface USB2.0,UVC Protocol
IR-CUT Control IR-CUT motor control, 3.3VDC
Day/Night External Trigger 3.3VDC to 5VDC compatibility
General
Operating Conditions -10℃~50℃, Humidity 95% or less, non-condensing
Power Supply 5VDC
Power Consumption 5VDC,1.5W MAX
Dimension 38mm*38mm*10mm(not include lens and lens mount)


4 Interface & Pin list

CS-USB-IMX307 TOP PIC
CS-USB-IMX307 BOTTOM INTERFACE

4.1 J1:USB2.0 Interface

1 VBUS(5V)
2 D-
3 D+
4 GND

4.2 J3:Power Input, Used during firmware upgrade

1 5VDC IN
2 NC
3 NC
4 GND

4.3 J4:Day/Night External Trigger

1 IR LED ON,Low level active
2 GND
3 RESERVE

4.4 J6:IRCUT Control

1 IRCUT1
2 IRCUT2

4.5 J7:Trigger IN,Strobe OUT ( RESERVE )

1 Trigger IN
2 GND
3 Strobe OUT


5 Board Dimension

All data is in millimeters


File:CS-USB-IMX307 TOP CAD.pdf
CS-USB-IMX307 TOP CAD



6 Select a Lens for This Camera Module

The lens models listed below can be used with CS-USB-IMX307 module.



升级固件方法