VEYE-MIPI-IMX327S Data Sheet

From wiki_veye
Revision as of 09:27, 1 September 2023 by Xumm (talk | contribs) (→‎Thechnical Detail)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

查看中文

VEYE-MIPI-IMX327S DATA SHEET

1 Introduction

The VEYE-MIPI-IMX327S is an updated version of the VEYE-MIPI-327(E). VEYE-MIPI-IMX327S features a compact single board design (38*38mm) for easy integration. The standard 15pin FPC user interface enables easy access to embedded platforms such as Raspberry Pi、Nvidia、NXP i.MX 8M.The function of automatic power switch is added,5V and 3.3V power supply can be automatically switched to 5V power supply, or you can freely choose 5V or 3.3V independent power supply.

VEYE-MIPI-IMX327S

2 Features

  • 1/2.8 inch 2 Mega STARVIS sensor IMX327LQR-C by SONY
  • MIPI output: CSI-2
  • Uncompressed UYVY / YUYV format, YUV422-8bit
  • Standard lens mount
  • IR-CUT circuit
  • Stream mode and Capture mode
  • Framerate control
  • BLC, DOL-WDR, 2D/3D noise reduction, Anti-fog
  • Brightness, Contrast, Sharpness, Saturation adjustable
  • Support 5V - 3.3V access at the same time, automatic switch 5V power supply
  • Also support 5V, 3.3V independent power supply
VEYE-MIPI-IMX327S

3 Thechnical Detail

Technical Details
SENSOR
Sensor SONY IMX327LQR-C STARVIS
Pixels 2.07M pixels
Resolution 1920*1080
Image Size Diagonal 6.46 mm (Type 1/2.8)
Unit Cell Size 2.9um (H)*2.9um(V)
Output Format RAW Bayer
Shutter Type Rolling Shutter
SNR1s Value 0.18lx
ISP
Frame Rate 1080p@25 / 1080p@30fps
Exposure Auto or Manual
White Balance Auto or Manual
Shutter 1/25(1/30)s to 1/50,000s
Slow Shutter Support
Denoising 2D/3D noise reduction
Image Setting Brightness, Contrast, Sharpness, Saturation,Flip, Mirror
Image Enhancement BLC, DOL-WDR
Day/Night Switch Manual or IR-CUT filter with external trigger
Lens & IR-CUT
Lens MTV12 / MTV16 / CS
Lens Mount M12*P0.5 / M16*P0.5 / CS,IRCUT is optional
Mounting Hole 2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing
Interface
Connector 15Pin 1.0mm pitch FPC, upper contact
Communication Interface IIC, 3.3VDC
Video Data Interface MIPI:2 Data Lanes, CSI-2

UYVY / YUYV format YUV422-8bit Data Type, Bandwidth 1.188Gbps MIPI CSI-2 DC Specifications

IR-CUT Control IR-CUT motor control, 3.3VDC
Day/Night External Trigger 3.3VDC to 12VDC compatibility
General
Operating Conditions

(Bare PCB)

Performance guarantee temperature:-10℃~60℃, Humidity 95% or less, non-condensing

Operating guarantee temperature:-30℃~85℃, Humidity 95% or less, non-condensing

Power Supply 3.3VDC or 5VDC
Power Consumption Usually: 1.1W

IR_CUT action switching moment: 1.6W

Dimension 38mm*38mm*11mm(not include lens and lens mount)

4 Spectral Sensitivity Characteristics

Sensor Spectral Sensitivity
IMX327LQR-C
IMX327LQR-C Spectral Sensitivity

5 Connector Pinlist

VEYE-MIPI-IMX327S
VEYE-MIPI-IMX327S
J3:CSI-2 Interface
Pin NO. NAME Remarks
1 GND
2 MIPI_L0_N
3 MIPI_L0_P
4 GND
5 MIPI_L1_N
6 MIPI_L1_P
7 GND
8 MIPI_CK_N
9 MIPI_CK_P
10 GND
11 RST NOT USE,Circuit disconnection
12 NC
13 SCL 3.3V level
14 SDA 3.3V level
15 VCC3V3 PWR IN
J2 : Day/Night External Trigger
Pin NO. NAME Remarks
1 Day&Night Signal In INPUT,Active Low(Image to MONO),3.3VDC to 12VDC compatibility
2 GND
3 NC
J4 : IRCUT Control Functional specifications
MODE Pin NO. PIN NAME Signal polarity Image type Filter position
Mode 1 1 IRCUT1 - color Infrared cutoff
2 IRCUT2 +
Mode 2 1 IRCUT1 + mono Full wavelength pass
2 IRCUT2 -
J6:5VDC INPUT
Pin NO. NAME Remarks
1 5VDC
2 GND
J7:Auxiliary IIC
Pin NO. NAME Remarks
1 AUX_SCL
2 GND
3 AUX_SDA

6 Board Dimension

CAD drawing unit : mm

download dwg file

7 PCBA 3D STP File

download 3D STP file