Difference between revisions of "MV-MIPI-SC130M Data Sheet"
Jump to navigation
Jump to search
| (7 intermediate revisions by 3 users not shown) | |||
| Line 11: | Line 11: | ||
==Features== | ==Features== | ||
| − | * 1/2.7<nowiki>''</nowiki> 1.3M Pixel SmartGS<sup>®</sup> CMOS SENSOR | + | * 1/2.7<nowiki>''</nowiki> 1.3M Pixel SmartGS<sup>®</sup> SC130GS-M CMOS SENSOR |
*MIPI CSI-2 Interface | *MIPI CSI-2 Interface | ||
| − | * | + | *RAW8、RAW10 Data Format |
*Video streaming mode（Free Running），Trigger mode | *Video streaming mode（Free Running），Trigger mode | ||
*Hardware and Software trigger source | *Hardware and Software trigger source | ||
| Line 51: | Line 51: | ||
|- | |- | ||
|Max Frame Rate | |Max Frame Rate | ||
| − | |1280 × 1024@ | + | |1280 × 1024@214fps RAW8 |
| + | 1280 × 1024@177fps RAW10 | ||
|- | |- | ||
|Gain | |Gain | ||
| Line 69: | Line 70: | ||
|- | |- | ||
|Pixel Format | |Pixel Format | ||
| − | | | + | |RAW8，RAW10 |
|- | |- | ||
|ROI | |ROI | ||
| Line 166: | Line 167: | ||
|7 | |7 | ||
|ENABLE | |ENABLE | ||
| − | |Power | + | |Power Enable，3.3V，ACTIVE High |
|- | |- | ||
|8 | |8 | ||
| Line 245: | Line 246: | ||
|- | |- | ||
|27 | |27 | ||
| − | | | + | |OUT_2 |
|Multi-function Port 2，3.3V level | |Multi-function Port 2，3.3V level | ||
|- | |- | ||
|28 | |28 | ||
| − | | | + | |OUT_1 |
|Multi-function Port 1，3.3V level | |Multi-function Port 1，3.3V level | ||
|- | |- | ||
|29 | |29 | ||
| − | | | + | |TriggerIN |
|Hardware Trigger in，3.3V level | |Hardware Trigger in，3.3V level | ||
|- | |- | ||
| Line 261: | Line 262: | ||
|} | |} | ||
==Board Dimension== | ==Board Dimension== | ||
| − | Download dwg file here | + | [[File:PCBA-RAW-SC130GS-M-2D-jpeg.jpg|center|thumb|600x600px]] |
| + | [[Media:PCBA-RAW-SC130GS-M-2D.7z|Download dwg file here]] | ||
== PCBA 3D STP File == | == PCBA 3D STP File == | ||
| − | + | [[Media:PCBA-RAW-SC130GS-M-3D.7z|Download 3D STP file]] | |
__FORCETOC__ | __FORCETOC__ | ||
Latest revision as of 16:21, 29 April 2024
MV-MIPI-SC130M Data Sheet
1 Introduction
MV-MIPI-SC130M is a 1.3 million MONO industrial camera with MIPI interface.
This camera has a small size (29*29mm) and rich functions, so it is suitable for integration as an image acquisition component.
2 Features
- 1/2.7'' 1.3M Pixel SmartGS® SC130GS-M CMOS SENSOR
- MIPI CSI-2 Interface
- RAW8、RAW10 Data Format
- Video streaming mode（Free Running），Trigger mode
- Hardware and Software trigger source
- Support trigger frame number, interval, delay, trigger filter function
- Strobe synchronization
- ROI
- USER Output
- Flexible frame rate settings
3 Technical Detail
| Technical Details | |
| Sensor Type | CMOS |
| Shutter Mode | Global Shutter |
| Sensor | SmartGS® SC130GS-M |
| Color | MONO |
| Image Size | 1/2.7'' |
| Unit Cell Size | 4μm × 4μm |
| Resolution | 1280（H） × 1024（V） |
| Max Frame Rate | 1280 × 1024@214fps RAW8
1280 × 1024@177fps RAW10 |
| Gain | 0-40dB，0.1dB step |
| Exposure Time | ≤ 1/（max frame rate） |
| Shutter Mode | AE，ME，AE Once |
| ISP | Bad Pixel Correction，8bit GAMMA，User Lookup Table |
| ADC Resolution | 10 bit |
| Pixel Format | RAW8，RAW10 |
| ROI | Support |
| Mirror Image | Mirror and Flip |
| Working Mode | Hardware Trigger，Software Trigger，Video streaming mode（Free Running） |
| Trigger Mode | Trigger Filtering，Trigger Delay，Trigger Polarity Control |
| Strobe Mode | Strobe Output Control，Strobe Delay，Strobe Polarity Control |
| Electrical characteristics | |
| Data Interface | CSI-2 : 2 Data Lanes
Data Rate / lane：1.5Gbps |
| Communication Interface | I2C 3.3V |
| Digital IO | Non-isolation IO：1 Trigger in，2 Multi-function output，3.3V Level |
| Power Supply | 5VDC |
| Power Consumption | 1.0W@ 5V DC |
| Structure | |
| Size | Length * width * height = 29*29*11mm |
| Lens Mount | C-MOUNT01 |
| Operating Conditions | |
| Temperature | Operating temperature：-30℃~ 60℃ |
| Humidity | Humidity 95% or less |
4 Spectral Sensitivity Characteristics
| Sensor | Spectral Sensitivity |
| SC130GS-M |
5 Interface & Pin list
| J3: CSI-2 Interface，Up Contact | ||
| Pin NO. | NAME | Remarks |
| 1 | GND | |
| 2 | VCC | 5V |
| 3 | VCC | 5V |
| 4 | VCC | 5V |
| 5 | VCC | 5V |
| 6 | GND | |
| 7 | ENABLE | Power Enable，3.3V，ACTIVE High |
| 8 | GND | |
| 9 | MIPI_L0_N | Lane 0 Negative |
| 10 | MIPI_L0_P | Lane 0 Positive |
| 11 | GND | |
| 12 | MIPI_L1_N | Lane 1 Negative |
| 13 | MIPI_L1_P | Lane 1 Positive |
| 14 | GND | |
| 15 | MIPI_CK_N | CLK Negative |
| 16 | MIPI_CK_P | CLK Positive |
| 17 | GND | |
| 18 | MIPI_L2_N | Reserved |
| 19 | MIPI_L2_P | Reserved |
| 20 | GND | |
| 21 | MIPI_L3_N | Reserved |
| 22 | MIPI_L3_P | Reserved |
| 23 | GND | |
| 24 | SCL | I2C SCL, 3.3V Level |
| 25 | SDA | I2C SDA, 3.3V Level |
| 26 | GPIO3 | Reserved |
| 27 | OUT_2 | Multi-function Port 2，3.3V level |
| 28 | OUT_1 | Multi-function Port 1，3.3V level |
| 29 | TriggerIN | Hardware Trigger in，3.3V level |
| 30 | GND | |
6 Board Dimension
7 PCBA 3D STP File