Difference between revisions of "ADP-MV2 Adapter Board Data Sheet/zh"

Latest revision as of 14:37, 4 June 2025

Adapter Board:ADP-MV2 DATA SHEET

转接板:ADP-MV2数据手册

1 Introduction 产品介绍

ADP-MV2是一款转接板，可将MV系列和RAW系列FFC接口转换为Firefly's ROC-RK35xx-PC 30Pin Camera接口。注意，本文描述的为2.0版本转接板，历史版本 V1.0 请点击此处。

ADP-MV2 is an adapter board that can convert the FFC interfaces of MV series and RAW series cameras to the Firefly's ROC-RK35xx-PC 30-pin camera interface. This article describes the 2.0 version of the adapter board. For the previous version V1.0, please click here.

2 Product Picture 产品图片

PART NUMBER / 型号	FRONT VIEW / 正面图片	BACK VIEW / 背面图片	Camera Support / 适配摄像机模组
ADP-MV2	ADP-MV2	ADP-MV2	MV-MIPI-IMX178M MV-MIPI-SC130M MV-MIPI-IMX287M MV-MIPI-IMX296M MV-MIPI-IMX265M MV-MIPI-IMX264M RAW-MIPI-SC132M

ADP-MV2 J1/J3/J4 PINLIST

ADP-MV2 J2/J5 PINLIST

3 Board Pinlist 引脚说明

J1：Down contact，30Pin 20cm FFC，connect with Firefly 30Pin FPC connector J1：上接触，标配30Pin 20cm同面FFC，与Firefly 30Pin 接口FPC座互联
Pin NO. 引脚号	NAME 名称	Remarks 说明
1	SDA_18	1.8V
2	SCL_18	1.8V
3	PDN_CAM	1.8V
4	NC
5	GND
6	NC
7	NC
8	NC
9	NC
10	GND
11	MIPI_L0_P
12	MIPI_L0_N
13	GND
14	MIPI_L1_P
15	MIPI_L1_N
16	GND
17	MIPI_CK_P
18	MIPI_CK_N
19	GND
20	NC
21	NC
22	GND
23	NC
24	NC
25	GND
26	NC
27	NC
28	GND
29	VCC5V	POWER IN, DC5V
30	VCC5V	POWER IN, DC5V

J3：Auxiliary Expansion Port 1 J3：辅助扩展口1
Pin NO. 引脚号	NAME 名称	Remarks 说明	Pin NO. 引脚号	NAME 名称	Remarks 说明
1	VCC5V	板内连接到 J2-29	2	GND
3	TRIGGER_I	板内连接到 J2-2	4	GND
5	USER IO1	板内连接到 J2-3	6	GND
7	USER IO2	板内连接到 J2-4	8	GND
9	GPIO3	板内连接到 J2-5	10	GND
Links 相关链接： mv_mipi_i2c.sh user guide：IO Control en MV Series MIPI Camera Register Map：IO Control en 中文

J4：Auxiliary Expansion Port 2 J4：辅助扩展口2
Pin NO. 引脚号	NAME 名称	Remarks 说明
1	VCC5V	板内连接到 J2-29
2	GND
3	TRIGGER_I	板内连接到 J2-2
4	USER IO1	板内连接到 J2-3
5	USER IO2	板内连接到 J2-4
6	GPIO3	板内连接到 J2-5
7	GND
8	NC
9	NC
10	GND
Links 相关链接： mv_mipi_i2c.sh user guide：IO Control en MV Series MIPI Camera Register Map：IO Control en 中文

*J2：Up Contact,* Connect to MV-MIPI-XXX Industry Camera J3 J2: 上接触，连接MV-MIPI-XXX系列工业相机 J3**
Pin NO. 引脚号	NAME 名称	Remarks 说明
1	GND
2	TRIGGER_I	Hardware Trigger in，3.3V level；硬件触发输入，3.3V电平标准
3	USER IO1	Multi-function Port 1，3.3V level；可配置输出1，3.3V电平标准
4	USER IO2	Multi-function Port 2，3.3V level；可配置输出2，3.3V电平标准
5	GPIO3	Reserved 预留
6	SDA_33	I2C SDA, 3.3V Level
7	SCL_33	I2C SCL, 3.3V Level
8	GND
9	MIPI_L3_P	Reserved 预留
10	MIPI_L3_N	Reserved 预留
11	GND
12	MIPI_L2_P	Reserved 预留
13	MIPI_L2_N	Reserved 预留
14	GND
15	MIPI_CK_P	CLK Positive
16	MIPI_CK_N	CLK Negative
17	GND
18	MIPI_L1_P	Lane 1 Positive
19	MIPI_L1_N	Lane 1 Negative
20	GND
21	MIPI_L0_P	Lane 0 Positive
22	MIPI_L0_N	Lane 0 Negative
23	GND
24	ENABLE	Camera Power Enable
25	GND
26	VCC	5V
27	VCC	5V
28	VCC	5V
29	VCC	5V
30	GND

*J5: Up Contact,* Connect to RAW-MIPI-XXX Industry Camera J3 J5：上接触，连接RAW-MIPI-XXX系列相机 J1**
Pin NO. 引脚号	NAME 名称	Remarks 说明
1	GND
2	MIPI_L0_N
3	MIPI_L0_P
4	GND
5	MIPI_L1_N
6	MIPI_L1_P
7	GND
8	MIPI_CK_N
9	MIPI_CK_P
10	GND
11	ENABLE	3.3V Level
12	NC
13	SCL_33	3.3V Level
14	SDA_33	3.3V Level
15	VCC3V3

*J6: Up Contact,* Connect to RAW-MIPI-XXX Industry Camera J6：上接触，连接RAW-MIPI-XXX系列相机**
Pin NO. 引脚号	NAME 名称	Remarks 说明
1	VCC3V3
2	SDA_33	3.3V Level
3	SCL_33	3.3V Level
4	GND
5	NC
6	ENABLE	3.3V Level
7	GND
8	MIPI_L3_P
9	MIPI_L3_N
10	GND
11	MIPI_L2_P
12	MIPI_L2_N
13	GND
14	MIPI_CK_P
15	MIPI_CK_N
16	GND
17	MIPI_L1_P
18	MIPI_L1_N
19	GND
20	MIPI_L0_P
21	MIPI_L0_N
22	GND

4 Schematic 原理图

Download schematic file

5 Board Dimension 尺寸图

Download 2D DXF file

6 PCBA 3D STP File(3D STP文件)

Download 3D STP file

@@ Line 4: / Line 4: @@
 ==Introduction 产品介绍==
-ADP-MV2是一款转接板，可将MV系列和RAW系列FFC接口转换为Firefly开源团队 ROC-RK35xx-PC 30Pin Camera接口。注意，此转接板有更新，[[ADP-MV2-V10 Adapter Board Data Sheet/zh|历史版本信息请点击此处]]。
+ADP-MV2是一款转接板，可将MV系列和RAW系列FFC接口转换为Firefly's ROC-RK35xx-PC 30Pin Camera接口。注意，本文描述的为2.0版本转接板，[[ADP-MV2-V10 Adapter Board Data Sheet/zh|'''''历史版本 V1.0 请点击此处''''']]。
-ADP-MV2 is an adapter board that can convert the FFC interfaces of MV series and RAW series cameras to the Firefly open source team ROC-RK35xx-PC 30-pin camera interface.
+ADP-MV2 is an adapter board that can convert the FFC interfaces of MV series and RAW series cameras to the Firefly's ROC-RK35xx-PC 30-pin camera interface. This article describes the 2.0 version of the adapter board. '''''For the previous version V1.0, please click [[ADP-MV2-V10 Adapter Board Data Sheet/zh|here]]'''''.
 ==Product Picture 产品图片==
@@ Line 38: / Line 38: @@
 {| class="wikitable"
 | colspan="3" |'''J1：Down contact，30Pin 20cm FFC，connect with Firefly 30Pin FPC connector'''
-'''J1：下接触，标配30Pin 20cm同面FFC，与Firefly 30Pin 接口FPC座互联'''
+'''J1：上接触，标配30Pin 20cm同面FFC，与Firefly 30Pin 接口FPC座互联'''
 |-
 |'''Pin NO. 引脚号'''
@@ Line 49: / Line 49: @@
 |-
 |2
-|SDA_18
+|SCL_18
 |1.8V
 |-
@@ Line 178: / Line 178: @@
 |1
 |VCC5V
-|板内连接到 J2-2
+|板内连接到 J2-29
 |2
 |GND
@@ Line 185: / Line 185: @@
 |3
 |TRIGGER_I
-|板内连接到 J2-29
+|板内连接到 J2-2
 |4
 |GND
@@ Line 192: / Line 192: @@
 |5
 |USER IO1
-|板内连接到 J2-28
+|板内连接到 J2-3
 |6
 |GND
@@ Line 199: / Line 199: @@
 |7
 |USER IO2
-|板内连接到 J2-27
+|板内连接到 J2-4
 |8
 |GND
@@ Line 206: / Line 206: @@
 |9
 | GPIO3
-|板内连接到 J2-26
+|板内连接到 J2-5
 |10
 |GND
@@ Line 226: / Line 226: @@
 |1
 |VCC5V
-|板内连接到 J2-2
+|板内连接到 J2-29
 |-
 | 2
@@ Line 234: / Line 234: @@
 |3
 | TRIGGER_I
-|板内连接到 J2-29
+|板内连接到 J2-2
 |-
 |4
 |USER IO1
-|板内连接到 J2-28
+|板内连接到 J2-3
 |-
 |5
 |USER IO2
-|板内连接到 J2-27
+|板内连接到 J2-4
 |-
 |6
 |GPIO3
-|板内连接到 J2-26
+|板内连接到 J2-5
 |-
 |7
@@ Line 569: / Line 569: @@
 ==Board Dimension 尺寸图==
+[[File:ADP-MV2-V20-0112-2DIMG.jpg|center|thumb|1024x1024px]]
 [[Media:ADP-MV2-V20-0112-2D.7z|Download 2D DXF file]]