VEYE-MIPI-IMX385 Data Sheet
VEYE-MIPI-IMX385 DATA SHEET
1 Introduction
VEYE-MIPI-IMX385 is a large Imaging size starlight video streaming module, using a compact design (38*38mm) to facilitate user integration, standard 15pin FPC user interface, easy access to embedded platforms such as raspberry pi and Nvidia.
The function of automatic power switch is added,5V and 3.3V power supply can be automatically switched to 5V power supply, or you can freely choose 5V or 3.3V independent power supply.
2 Features
- 1/2 inch 2 Mega sensor IMX385LQR-C by SONY
- MIPI output: CSI-2
- Uncompressed UYVY format, YUV422-8bit
- IR-CUT circuit
- Stream mode and Capture mode
- Framerate control
- BLC, DOL-WDR, 2D/3D noise reduction, Anti-fog
- Brightness, Contrast, Sharpness, Saturation adjustable
- Support 5V - 3.3V access at the same time, automatic switch 5V power supply
- Also support 5V, 3.3V independent power supply
3 Thechnical Detail
| Technical Details | |
| SENSOR | |
| Sensor | SONY IMX385LQR-C STARVIS |
| Pixels | 2.07M pixels |
| Resolution | 1920*1080 |
| Image Size | Diagonal 8.35 mm (Type 1/2) |
| Unit Cell Size | 3.75um (H) * 3.75um(V) |
| Output Format | RAW Bayer |
| Shutter Type | Rolling Shutter |
| SNR1s Value | 0.13lx |
| ISP | |
| Frame Rate | 1080p@25 / 1080p@30fps |
| Exposure | Auto or Manual |
| White Balance | Auto or Manual |
| Shutter | 1/25(1/30)s to 1/50,000s |
| Slow Shutter | Support |
| Denoising | 2D/3D noise reduction |
| Image Setting | Brightness, Contrast, Sharpness, Saturation,Flip, Mirror |
| Image Enhancement | BLC, DOL-WDR, Defog |
| Day/Night Switch | Manual or IR-CUT filter with external trigger |
| Lens & IR-CUT | |
| Lens | YT1.0-5.1-1/1.8-8M |
| Lens Mount | |
| Mounting Hole | 2 screw holes with diameter of 2.2mm,21.6mm Center-to-Center Spacing |
| Interface | |
| Connector | 15Pin 1.0mm pitch FPC, upper contact |
| Communication Interface | IIC, 3.3VDC |
| Video Data Interface | MIPI:2 Data Lanes, CSI-2 YUV422-8bit Data Type, Bandwidth 1.188Gbps |
| IR-CUT Control | IR-CUT motor control, 3.3VDC |
| Day/Night External Trigger | 3.3VDC to 12VDC compatibility |
| General | |
| Operating Conditions
(Bare PCB) |
Performance guarantee temperature：-10℃~60℃, Humidity 95% or less, non-condensing
Operating guarantee temperature：-30℃~85℃, Humidity 95% or less, non-condensing |
| Power Supply | 5VDC |
| Power Consumption | Usually: 1.3W
IR_CUT action switching moment: 1.7W |
| Dimension | 38mm*38mm*11mm(not include lens and lens mount) |
4 Spectral Sensitivity Characteristics
| Sensor | Spectral Sensitivity |
| IMX385LQR-C |
5 Connector Pinlist
| J3:CSI-2 Interface | ||
| Pin NO. | NAME | Remarks |
| 1 | GND | |
| 2 | MIPI_L0_N | |
| 3 | MIPI_L0_P | |
| 4 | GND | |
| 5 | MIPI_L1_N | |
| 6 | MIPI_L1_P | |
| 7 | GND | |
| 8 | MIPI_CK_N | |
| 9 | MIPI_CK_P | |
| 10 | GND | |
| 11 | RST | Active Low，reset camera module |
| 12 | NC | |
| 13 | SCL | 3.3V level |
| 14 | SDA | 3.3V level |
| 15 | VCC3V3 | PWR IN |
| J2 : Day/Night External Trigger | ||
| Pin NO. | NAME | Remarks |
| 1 | Day&Night Signal In | INPUT，Active Low（Image to MONO），3.3VDC to 12VDC compatibility |
| 2 | GND | |
| 3 | NC | |
| J4 : IRCUT Control Functional specifications | |||||
| MODE | Pin NO. | PIN NAME | Signal polarity | Image type | Filter position |
| Mode 1 | 1 | IRCUT1 | - | color | Infrared cutoff |
| 2 | IRCUT2 | + | |||
| Mode 2 | 1 | IRCUT1 | + | mono | Full wavelength pass |
| 2 | IRCUT2 | - | |||
| J6：5VDC INPUT | ||
| Pin NO. | NAME | Remarks |
| 1 | 5VDC | |
| 2 | GND | |
| J7：Auxiliary IIC | ||
| Pin NO. | NAME | Remarks |
| 1 | AUX_SCL | |
| 2 | GND | |
| 3 | AUX_SDA | |
6 Board Dimension
