VEYE CS Camera on Firfly Boards
How to use VEYE and CS series cameras on Firefly's RK35XX board (Ubuntu)
1 Overview
VEYE series and CS series cameras are the video streaming mode MIPI cameras we designed. This article takes Firefly's ROC-RK3566-PC board as an example to introduce how to connect VEYE and CS series cameras to RK3566/RK3568/RK3588 system.
1.1 Camera Module List
Series | Model | Status |
---|---|---|
VEYE Series | VEYE-MIPI-IMX327S | Done |
VEYE Series | VEYE-MIPI-IMX462 | Done |
VEYE Series | VEYE-MIPI-IMX385 | Done |
2 Hardware Setup
VEYE series and CS series cameras are provided with Raspberry Pi compatible 15Pin FFC connector. An ADP-Tfirefly adapter board is required to adapt to the ROC-RK3566-PC board.
2.1 Connection of camera and ADP-Tfirefly
The two are connected using 1.0 mm pitch*15P FFC cable with opposite direction. The cable must be inserted with the silver contacts facing outside.
2.2 Connection of ADP-Tfirefly and Firefly Board
The two are connected using 0.5 mm pitch*30P FFC cable with same direction. The cable must be inserted with the silver contacts facing inside.
2.3 Overall connection
TODO
3 Upgrade Firefly Ubuntu system
4 Check system status
5 Samples
5.1 v4l2-ctl
5.2 yavta
5.3 gstreamer
5.4 Import to OpenCV
6 i2c script for parameter configuration
7 Compile drivers and dtb from source code
8 References
- ROC-RK3566-PC Manual
https://wiki.t-firefly.com/en/ROC-RK3566-PC/
- Firefly Linux User Guide
https://wiki.t-firefly.com/en/Firefly-Linux-Guide/index.html
9 Document History
- 2022-10-22
Release 1st version.