Gx series camera appnotes 4 rpi
How to use the GX series cameras on the Raspberry board
1 overview
The GX series cameras are designed for embedded AI applications. They offer high-performance ISP capabilities, support multiple operating modes, provide a wide range of configurable features, and are built with a robust and reliable design. The cameras use the MIPI CSI-2 interface and are well suited for embedded computing platforms.
1.1 Supported modules
| series | model | state |
|---|---|---|
| GX系列 | GX-MIPI-IMX662 | complete |
1.2 Hardware Preparation and Installation
The GX-series cameras utilize a Raspberry Pi-compatible 22-pin interface but require an independent 5 V DC power supply.
1.3 The connection method of GX series cameras with 22-pin interface Raspberry Pi
1.4 The connection method between the GX series cameras and the 15-pin interface Raspberry Pi
2 Drive Installation and Verification
2.1 Download the driver package
wget https://github.com/veyeimaging/raspberrypi_v4l2/releases/latest/download/raspberrypi_v4l2.tgz
Domestic users can download it from Gitee:
https://gitee.com/veyeimaging/raspberrypi_v4l2/releases/
2.2 install the driver
tar -xzvf raspberrypi_v4l2.tgz
cd raspberrypi_v4l2/release/
chmod +x *
- For Raspberry Pi 5
sudo ./install_driver.sh veye_gxcam
Then restart the Raspberry Pi.
Note: If it is indicated that the corresponding version of the driver cannot be found, it means that we do not provide the compiled driver program corresponding to your PiOS version. Please try to compile from the source code.
2.3 Uninstall the driver
If you want to switch to a different model of the camera module driver, you must first uninstall the current driver.sudo ./uninstall_driver.sh veye_gxcam