RAW-MIPI-SC535M Data Sheet
Jump to navigation
Jump to search
RAW-MIPI-SC535M Data Sheet
1 Introduction
RAW-MIPI-SC535M is a 5 million MONO industrial camera with MIPI interface.
This camera has a small size (29*29mm) and rich functions, so it is suitable for integration as an image acquisition component.
2 Features
- 2/3'' 5M SmartSens CMOS Sensor
- MIPI CSI-2 Interface
- Mono 8,Mono 10,Mono 12 Data Format
- 2lane，4lane mode
- Manual exposure mode
- Video streaming mode, Trigger mode
- Hardware and Software trigger source
- Support trigger delay, trigger count function
- Strobe synchronization
- ROI
- Flexible frame rate settings
- Support Sensor Direct Access mode
3 Technical Detail
| Technical Details | |
| Sensor Type | CMOS |
| Shutter Mode | Global Shutter |
| Sensor | SC535HGS-MC3AN00 |
| Color | MONO |
| Image Size | 2/3'' |
| Unit Cell Size | 3.45um (H)*3.45um(V) |
| Resolution | Maximum: 2464(H) × 2064(V)
Typical: 2448(H) × 2048(V) |
| Max Frame Rate | 4lane@8bit mode：2448 x 2048 @100fps
4lane@10bit mode：2448 x 2048 @82fps 4lane@12bit mode：2448 x 2048 @70fps 2lane@8bit mode：2448 x 2048 @53fps 2lane@10bit mode：2448 x 2048 @43fps 2lane@12bit mode：2448 x 2048 @36fps |
| Gain | Analog Gain（HCG included）：1x to 48x（0dB-37.8dB）
Digital Gain: 1x to31.9x (0dB-30dB) |
| Exposure Time | ≤ 1/（max frame rate） |
| Shutter Mode | Manual Exposure，Manual Gain |
| ADC Resolution | 12 bit |
| Pixel Format | Mono8，Mono10，Mono12 |
| ROI | Support |
| Mirror Image | Mirror and Flip |
| Working Mode | Hardware Trigger，Software Trigger，Video streaming mode |
| Trigger Mode | Trigger INPUT |
| Strobe Mode | Strobe Output |
| Electrical characteristics | |
| Data Interface | MIPI CSI-2
Data Rate / lane：1188Mbps lane num：2 lane / 4 lane |
| Communication Interface | I2C 3.3V |
| Digital IO | Non-isolation IO：1 Trigger in，1 Strobe output，3.3V Level |
| Power Supply | 3.3V DC |
| Power Consumption | TBD |
| Structure | |
| Size | Length * width * height = 29*29*7.9mm |
| Lens Mount | C-MOUNT01 ,S-MOUNT01 or M12 holder |
| Operating Conditions | |
| Temperature | Operating temperature：-30℃~ 60℃ |
| Humidity | Humidity 95% or less |
4 Spectral Sensitivity Characteristics
| Sensor | Spectral Sensitivity |
| SC535HGS-MC3AN00 |
5 Interface & Pin list
| J9 : Camera MIPI CSI-2 | ||
| Pin NO.（引脚号） | NAME（名称） | Remarks（说明） |
| 1 | VCC3V3 | 3.3V PWR IN |
| 2 | SDA | 3.3V Level |
| 3 | SCL | 3.3V Level |
| 4 | GND | |
| 5 | NC | |
| 6 | SYS_RSTn | System reset，3.3V Level |
| 7 | GND | |
| 8 | MIPI_L3_P | |
| 9 | MIPI_L3_N | |
| 10 | GND | |
| 11 | MIPI_L2_P | |
| 12 | MIPI_L2_N | |
| 13 | GND | |
| 14 | MIPI_CK_P | |
| 15 | MIPI_CK_N | |
| 16 | GND | |
| 17 | MIPI_L1_P | |
| 18 | MIPI_L1_N | |
| 19 | GND | |
| 20 | MIPI_L0_P | |
| 21 | MIPI_L0_N | |
| 22 | GND | |
| J2：功能IO | ||
| Pin NO.（引脚号） | NAME（名称） | Remarks（说明） |
| 1 | Trigger In | Trigger Input，3.3V |
| 2 | GND | |
| 3 | Strobe Out | Strobe Output，3.3V |
6 Board Dimension
7 PCBA 3D STP File