Gx series camera appnotes 4 rpi

查看中文

How to use the GX series cameras on the Raspberry board

1 overview

The GX series cameras are designed for embedded AI applications. They offer high-performance ISP capabilities, support multiple operating modes, provide a wide range of configurable features, and are built with a robust and reliable design. The cameras use the MIPI CSI-2 interface and are well suited for embedded computing platforms.

1.1 Supported modules

series	model	state
GX系列	GX-MIPI-IMX662	complete

1.2 Hardware Preparation and Installation

The GX-series cameras utilize a Raspberry Pi-compatible 22-pin interface but require an independent 5 V DC power supply.

2 Drive Installation and Verification

2.1 Download the driver package

wget https://github.com/veyeimaging/raspberrypi_v4l2/releases/latest/download/raspberrypi_v4l2.tgz

Domestic users can download it from Gitee:

https://gitee.com/veyeimaging/raspberrypi_v4l2/releases/

2.2 install the driver

tar -xzvf raspberrypi_v4l2.tgz

cd raspberrypi_v4l2/release/

chmod +x *

• For Raspberry Pi 5

sudo ./install_driver.sh veye_gxcam

Then restart the Raspberry Pi.

Note: If it is indicated that the corresponding version of the driver cannot be found, it means that we do not provide the compiled driver program corresponding to your PiOS version. Please try to compile from the source code.

2.3 Uninstall the driver

If you want to switch to a different model of the camera module driver, you must first uninstall the current driver.
sudo ./uninstall_driver.sh veye_gxcam

2.4 System status verification

Take GX-MIPI-IMX662 as an example:
dmesg | grep gxcam

It can be seen that the camera model probed during the Linux startup stage is:

camera is: GX-MIPI-IMX662