5m mipi i2c user guide

查看中文

veye5_mipi_i2c.sh user guide

1 Overview

This script is an open source program to configure the camera module by direct access to i2c registers.

Applicable models: VEYE-MIPI-IMX335

2 veye5_mipi_i2c.sh help

Usage:  ./veye_mipi_i2c.sh [-r/w] [-f] function name -p1 param1 -p2 param2 -b bus

options:

-r                       read

-w                       write

-f [function name]       function name

-p1 [param1]   param1 of each function

-p2 [param1]   param2 of each function

-b [i2c bus num]  i2c bus number

-d [i2c addr]  i2c addr if not default 0x3b

2.1 i2c bus

bus number on jetson platform

2.2 Format description

The part in square brackets [param] in the following code indicates the variable.

2.4 manufacturer

./veye5_mipi_i2c.sh -r -f manufacturer

Read manufacturer information, always returns:

Manufacturer is VEYE

2.4.1 model

./veye5_mipi_i2c.sh -r -f model

Read the device model, for example: VEYE_MIPI_IMX335

2.4.2 version

./veye5_mipi_i2c.sh -r -f version

Reads the version number, for example:

control version is 01.03 , isp version 01.00

2.4.3 timestamp

./veye5_mipi_i2c.sh -r -f timestamp

Gets the time in milliseconds calculated from the moment the module starts up, incremented cyclically.

2.4.4 factoryparam

./veye5_mipi_i2c.sh -w -f factoryparam

All parameters revert to their default values.

2.4.5 paramsave

./veye5_mipi_i2c.sh -w -f paramsave

Save parameters. After all parameters are modified, this command must be executed for the parameters to be saved in flash and no longer lost when power off.

2.4.6 reboot

./veye5_mipi_i2c.sh -w -f reboot

reboot the camera.

2.4.7 errcode

./veye5_mipi_i2c.sh -r -f errcode

Get the camera error code. It should be 0 normally.

2.4.8 i2caddr

./veye5_mipi_i2c.sh -w -f i2caddr -p1 [new i2caddr] -d [old i2c addr]

./veye5_mipi_i2c.sh -r -f i2caddr -d [current i2c addr]

The camera i2c address,run paramsave and reboot to takes effect .

2.4.9 i2cport

./veye5_mipi_i2c.sh -w -f i2cport -p1 [i2c port]

./veye5_mipi_i2c.sh -r -f i2cport

The camera i2c port,run paramsave and reboot to takes effect .

value	description	Interface Position
0x00	use i2c port on FFC cable	VEYE-MIPI-IMX335：J1 IIC
0x01	use alternate i2c port	VEYE-MIPI-IMX335：J5 IIC AUX

2.4.10 daynightmode

./veye5_mipi_i2c.sh -w -f daynightmode -p1 [0,2]

./veye5_mipi_i2c.sh -r -f daynightmode

Day and night mode configuration

value	description
0x00	Color mode
0x01	White and Black mode
0x02	Trigger mode

2.4.11 ircutdir

./veye5_mipi_i2c.sh -w -f ircutdir -p1 [0,1]

./veye5_mipi_i2c.sh -r -f ircutdir

Controls whether the IRCUT control pin level reverse.

value	description
0x00	Default direction
0x01	Reverse IRCUT control pin level

2.4.12 irtrigger

./veye5_mipi_i2c.sh -w -f irtrigger -p1 [0,1]

./veye5_mipi_i2c.sh -r -f irtrigger

Trigger signal high and low level configuration in Trigger mode.

value	description
0x00	Low level for black and white mode, high level for color mode.
0x01	Low level for color mode, high level for black and white mode.

2.4.13 sensor_reg

./veye5_mipi_i2c.sh -r -f sensor_reg -p1 [sensor reg addr]

Read sensor register.

2.4.14 videomode

./veye5_mipi_i2c.sh -w -f videomode -p1 [video mode]

./veye5_mipi_i2c.sh -r -f videomode

Camera resolution configuration.

value	description
0x01	2592x1944@20fps
0x02	2592x1944@12.5fps
0x03	2560x1440@25fps
0x04	2560x1440@30fps

2.4.15 test_pattern

./veye5_mipi_i2c.sh -w -f test_pattern -p1 [test_enable] -p2 [type]

./veye5_mipi_i2c.sh -r -f test_pattern

Image test mode configuration.

2.4.16 awb_mode

./veye5_mipi_i2c.sh -w -f awb_mode -p1 [0,1]

./veye5_mipi_i2c.sh -r -f awb_mode

AWB mode configuration.

value	description
0x00	auto
0x01	oneset，write once to trigger a white balance operation

2.4.17 antiflicker

./veye5_mipi_i2c.sh -w -f antiflicker -p1 [0,1]

./veye5_mipi_i2c.sh -r -f antiflicker

Whether the anti-flicker function is on or not.

2.4.18 agc_max

./veye5_mipi_i2c.sh -w -f agc_max -p1 [0,0xf]

./veye5_mipi_i2c.sh -r -f agc_max

The upper limit of the auto gain function.

2.4.19 ae_target

./veye5_mipi_i2c.sh -w -f ae_target -p1 [0,0x64]

./veye5_mipi_i2c.sh -r -f ae_target

The target brightness of the automatic exposure.

2.4.20 ae_speed

./veye5_mipi_i2c.sh -w -f ae_speed -p1 [0,0x64]

./veye5_mipi_i2c.sh -r -f ae_speed

The adjustment speed of automatic exposure.

2.4.21 agc_speed

./veye5_mipi_i2c.sh -w -f agc_speed -p1 [0,0x64]

./veye5_mipi_i2c.sh -r -f agc_speed

The adjustment speed of auto gain.

2.4.22 exp_val

./veye5_mipi_i2c.sh -r -f exp_val

Current exposure value.

2.4.23 agc_val

./veye5_mipi_i2c.sh -r -f agc_val

Current gain value.

2.4.24 mshutter

./veye5_mipi_i2c.sh -w -f mshutter -p1 [0,0x0B]

./veye5_mipi_i2c.sh -r -f mshutter

Whether manual exposure is on and manual exposure configuration.

#0,auto; others, manual value

2.4.25 mirrormode

./veye5_mipi_i2c.sh -w -f mirrormode -p1 [0,0x03]

./veye5_mipi_i2c.sh -r -f mirrormode

Video flip configuration.

value	description
0x00	Normal
0x01	Mirror
0x02	V-flip
0x03	Mirror and V-flip

2.4.26 denoise_2d

./veye5_mipi_i2c.sh -w -f denoise_2d -p1 [0,0x3]

./veye5_mipi_i2c.sh -r -f denoise_2d

2D noise reduction intensity.

2.4.27 denoise_3d

./veye5_mipi_i2c.sh -w -f denoise_3d -p1 [0,0x3]

./veye5_mipi_i2c.sh -r -f denoise_3d

3D noise reduction intensity.

2.4.28 sharppen

./veye5_mipi_i2c.sh -w -f sharppen -p1 [0,0x0f]

./veye5_mipi_i2c.sh -r -f sharppen

Sharpening intensity configuration.

value	description
0x00	close
0x09	low
0x0B	middle
0x0C	high