CS-MIPI-IMX307 STARVIS Module

From wiki_veye
Jump to navigation Jump to search

查看中文

CS-MIPI-IMX307 Data Sheet

1 Introduction

CS-MIPI-IMX307 is a highly cost-effective CSI-2 (MIPI) interface camera module, using SONY STARVIS IMX307 image sensor,

built-in excellent ISP image processing, convenient for customers to quickly integrate and release products.

CS-MIPI-IMX307 TOP


CS-MIPI-IMX307 BOT

2 Features

  • SONY IMX307 STARVIS Sensor, 1/2.8 inch 2 Mega
  • Built-in ISP processing
  • CSI-2 Interface
  • Uncompressed UYVY format, YUV422-8bit
  • Standard lens mount
  • IR-CUT circuit
  • BLC, Digtal WDR, 2D/3D noise reduction, Anti-fog
  • Brightness, Contrast, Sharpness, Saturation adjustable
  • Support Multi-camera Module Video Stream Synchronization
  • Support firmware upgrade via USB disk
  • Support Raspberry PI Platform,RK3399, NVIDIA JETSON Platform


3 Technical Detail

Technical Details
SENSOR
Sensor SONY IMX307LQD-C STARVIS
Pixels 2.07M pixels
Resolution 1920*1080
Image Size Diagonal 6.46 mm (Type 1/2.8)
Unit Cell Size 2.9um (H)*2.9um(V)
Output Format Bayer
Shutter Type Rolling Shutter
SNR1s Value 0.24lx
ISP
Frame Rate 1080p@25fps / 30fps,720p@50fps / 60fps(cropping mode),VGA@130fps(cropping mode)
Exposure Auto or Manual
White Balance Auto or Manual
Shutter 1/25(1/30)s to 1/50,000s
Slow Shutter Coming Soon
Denoising 2D/3D noise reduction
Image Setting Brightness, Contrast, Sharpness, Gamma, Saturation,Flip, Mirror
Image Enhancement BLC, Digtal WDR, Defog
Day/Night Switch Manual or IR-CUT filter with external trigger
Video Stream Synchronization Support Multi-camera Module Video Stream Synchronization
Lens & IR-CUT
Lens MTV12 / MTV16 / CS
Lens Mount M12*P0.5 / M16*P0.5 / CS,IRCUT is optional
Mounting Hole 2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing
Interface
Connector 15PIN FPC, Compatible with Raspberry PI,JETSON NANO
Communication Interface IIC, 3.3VDC
Video Data Interface CSI-2 : 2 Data Lanes, CSI-2 YUV422-8bit Data Type, Datarate=594Mbps/lane

MIPI CSI-2 DC Specifications

IR-CUT Control IR-CUT motor control, 3.3VDC
Day/Night External Trigger 3.3VDC to 5VDC compatibility
General
Operating Conditions

(Bare PCB)

Performance guarantee temperature:-10℃~60℃, Humidity 95% or less, non-condensing

Operating guarantee temperature: -30℃~85℃, Humidity 95% or less, non-condensing

Power Supply 5VDC / 3.3VDC optional
Power Consumption 1.4W
Dimension 38mm*38mm*10mm(not include lens and lens mount)

4 Spectral Sensitivity Characteristics

Sensor Spectral Sensitivity
IMX307LQD-C
IMX307LQD-C Spectral Sensitivity

5 Interface & Pin list

CS-MIPI-IMX307-TOP INTERFACE
CS-MIPI-IMX307-BOTTOM INTERFACE
J1 : Firmware Update
Pin NO. NAME Remarks
1 VBUS(5V) Connect the USB upgrade cable & USB disk
2 D-
3 D+
4 GND
J3 : Power Input
Pin NO. NAME Remarks
1 VCC5V use by default. How to use 3.3V power supply
2 GND
J4 : Day/Night External Trigger
Pin NO. NAME Remarks
1 IR LED ON INPUT,Low level active(Image to MONO),3.3VDC to 12VDC compatibility
2 GND
3 RESERVE NC
J6 : IRCUT Control
Pin NO. NAME Remarks
1 IRCUT1
2 IRCUT2
J6 IRCUT Control Functional specifications
MODE pin Signal polarity Image type Filter position
Mode 1 IRCUT1 + color Infrared cutoff
IRCUT2 -
Mode 2 IRCUT1 - mono Full wavelength pass
IRCUT2 +
J7 : Multi-function GPIO
Pin NO. NAME Remarks
1 GPIO0 Can Be Configured As Video Stream Synchronization Signal
2 GND
3 GPIO1 Can Be Configured As Video Stream Synchronization Signal
J8 : CSI-2 Interface
Pin NO. NAME Remarks
1 GND
2 MIPI_L0_N
3 MIPI_L0_P
4 GND
5 MIPI_L1_N
6 MIPI_L1_P
7 GND
8 MIPI_CK_N
9 MIPI_CK_P
10 GND
11 NC
12 NC
13 SCL 3.3V Level
14 SDA 3.3V Level
15 VCC3V3 NC by default,How to use 3.3V power supply


6 Board Dimension

CS-MIPI-IMX307 CAD drawing / unit : mm

Download dwg file here