FPD LINK III for Jetson
1 Introduction
FPD-Link SerDes III is a coaxial remote transmission scheme of video stream provided by TI. We have designed FPD-LINK3-TX and FPD-LINK3-2RX boards, which can realize coaxial transmission of 1 or 2 channels of MIPI CSI-2 images, and the transmission distance can be up to 8meters(RG174 RF Cable) or 10meters(RG58 RF Cable).
On Jetson Nano/NX platform, a set of FPD-LINK3-TX and FPD-LINK3-2RX boards are used to realize the remote transmission of 1-channel video. The I2C address of the camera after initialization configuration is the same as that of the original camera.On FPD-LINK3-2RX board, fpdlink channel is from port0(J3) to J9.
On Jetson TX2/AGX Xavier platform, a set of FPD-LINK3-TX and FPD-LINK3-2RX boards are used to realize the remote transmission of 2-channel video. On FPD-LINK3-2RX board, fpdlink channel is from port0(J3) and port1(J4) to J7. J7 is a MIPI interface of 4 lan, which supports two independent camera data transmission through virtual channel technology.
For application layer, it support all MIPI camera functions, including image, i2C communication, synchronous IO and trigger IO.
Therefore, when using CS-FPD-CAM, you must refer to the following article: